DigiTrace NGC-UIT Loader Utility - Pentair Thermal Management

Click on the Save Data button (Label J). The program will then extract therequired data from the DigiTrace NGC-UIT and use it to create an XML file.Ethernet ConnectionConnect an Ethernet cable from the DigiTrace NGC-UIT to a PC with a crossover cable.An alternative method would be to connect both the NGC-UIT and the PC to a device suchas a server or a consumer router. See Appendix 1 for additional information.Step 1Connect a laptop computer to the DigiTrace NGC-UIT via the Ethernet port.Step 2 Start the DigiTrace UIT Loader program by clicking on the icon on your desktop Click on the NGC-UIT to XML tab near the top of the window.Step 3Select the temperature Units (°F or ºC) (Label E).IMPORTANT: If the temperature units on the NGC-30 UIT are currently set toºC and the temperature units on the Loader Programs (see above) are selectedas ºF, when the circuit data is imported from the NGC-30 UIT to the ExcelSpreadsheet, the temperatures on the Spreadsheet will be in ºF.Set the NGC-UIT Port to Ethernet (Label F).Set the DigiTrace NGC-UIT IP Address and NGC-UIT Modbus Address so thatit matches the settings on the NGC-UIT’s System|Comm screen (Label A/G andLabel B/H respectively).THERMAL MANAGEMENT SOLUTIONS EN-NGC30LoaderUtility-IM-H58045 04/13 25/34