AGP Pellet Stove - Avalon

22 OperationLoading PelletsLift the hopper lid to its vertical position. Pour pellets into the hopper until full.NOTE: The control panel door should be closed when opening the hopper lid, to prevent the twoparts from making contact.HINT: We recommend pressing the “STOP” button, then press the “START” button afterreloading the stove.NOTE: The stove will not run if the lid is open.Starting the Heater for the First TimeStart the Heater - Let it Burn for 1 Hour - THEN OPEN THE DOOR.The stove paint is cured through heat. To prevent it from bonding to the door gasket, you must burnthe heater for approximately 1 hour, then open and close the door to break any bonding.Curing the PaintThis stove uses a heat-activated paint that willemit some fumes while starting the first fire.Open doors and windows to the room to ventthese fumes. You may also notice oil burningoff of the interior of the stove. This ruststoppingagent will soon dissipate. Allow 48hours for the paint to cure.Allow 2 to 48 4 hours© Travis Industries 4130924 100-01330_004