contract for design-build services for the design - City of Miami

Equipment and materials shall be stored prior to installation as recommended by the
manufacturer. Generally, materials such as pipe shall be stored off the ground in
approved storage yards. Items subject to damage by the elements, vandalism, or theft
shall be stored in secure buildings. Items requiring environmental control for protection
shall be provided with the necessary environmentally controlled storage facilities at no
cost to the City.
Insurance
The Design-Build Firm‟s insurance shall adequately cover the value of materials
delivered but not yet incorporated into the Work.
Inventory Control
Equipment and materials shall be stored in a manner to provide easy access for
inspection and inventory control. The Design-Build Firm shall keep a running account of
all materials in storage to facilitate inspection and to estimate progress payments for
materials delivered but not installed in the Work.
Equipment‟s Maintenance Prior to Acceptance by the City
Provide the required or manufacturer‟s recommended maintenance during storage,
during the installation, and until such time as the City accepts the equipment for full-time
operation.
Salvage Equipment
Any salvageable pipe, fittings, or other miscellaneous material or equipment removed
during construction and not reused in the Work shall be cleaned, hauled, and stored by
the Design-Build Firm at his own expense, where directed by the Project Manager, and
shall remain the property of the City. All other material shall be disposed of by the
Design-Build Firm at his own expense.
37. Manufacturer’s Instructions
The Design-Build Firm shall:
Comply with manufacturer‟s requirements for the handling, delivery, storage, and
installation of all materials, and equipment. Where required by the Contract Documents,
Design-Build Firm shall submit manufacturer‟s printed instructions for delivery, storage,
assembly, and installation.
Comply with the manufacturer‟s applicable instructions and recommendations for the
performance of the Work, to the extent that these instructions and recommendations are
more explicit or more stringent than requirements indicated in the Contract Documents
including the Contract Documents.
Inspect each item of material or equipment immediately prior to installation and reject
damaged and defective items.
Provide attachment and connection devices and methods for securing the Work; secure
Work true to line plumb and level, and within recognized industry standards; allow for
expansion and building movement; provide uniform joint width in exposed Work; arrange
joints in exposed Work to obtain the best visual effect and refer questionable visual
effect choices to the Consultant for final decision when applicable to the Work.
Recheck measurements and dimensions of the Work, as an integral step in starting each
portion of the Work.
28
Design-Build Services for Seawall Stabilization and Repair Project RFP 11-12-033