ABB i-bus® EIB 4-fold switch sensor solo®, FM Type: 6127-xx
ABB i-bus® EIB 4-fold switch sensor solo®, FM Type: 6127-xx
ABB i-bus® EIB 4-fold switch sensor solo®, FM Type: 6127-xx
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>ABB</strong> i-bus ® <strong>EIB</strong>4-<strong>fold</strong> <strong>switch</strong> <strong>sensor</strong> solo ® , <strong>FM</strong><strong>Type</strong>: <strong>6127</strong>-<strong>xx</strong>ParametersThe default setting for the valuesis printed in bold type.Additional parameters when used with <strong>switch</strong> actuator <strong>FM</strong> (6110 U-101):Switch actuator - General:– Behaviour of contact normally open contactnormally closed contact– Contact on mains voltage recovery openedclosedrestore previous stateSwitch actuator - Operation modes:– Operation mode Normal operationStaircase lighting functionTiming functionOnly for staircase lighting function:– ON delay noyesOnly if “yes” is selected:– Time base for ON delay approx. 130 ms / … / approx. 520 ms/ … / approx. 1.2 h– Factor for ON delay 10(2…127)– Time base for staircase lighting approx. 130 ms / … / approx. 520 msfunction / … / approx. 1.2 h– Factor for staircase lighting 10function (2…127)Only for timing function:– ON delay noyesOnly if “yes” is selected:– Time base for ON delay approx. 130 ms / … / approx. 520 ms/ … / approx. 1.2 h– Factor for ON delay 10(2…127)– OFF delay noyesOnly if “yes” is selected:– Time base for OFF delay approx. 130 ms / … / approx. 520 ms/ … / approx. 1.2 h– Factor for OFF delay 10(2…127)– Logic operation no logic operationAND functionOR functionOnly if a logic operation is selected:– Value of logic operation on OFF “0”mains voltage recovery ON “1”– Status response noyes2 - 12 March 2003
Change language