ABB i-busÂ® EIB 4-fold switch sensor soloÂ®, FM Type: 6127-xx

More documents

Recommendations

Info

ABB i-bus ® EIB4-fold switch sensor solo ® , FMType: 6127-xxParametersThe default setting for the valuesis printed in bold type.Additional parameters when used with dimming actuator FM (6114 U):Dimming actuator - General:– Behaviour on change in the jump to valuebrightness valuedim to value– Brightness value for ON telegram final valueparameterised valueOnly for parameterised value:– Initial brightness value OFF / 10 % / … / 90 % / 100 %– Brightness value on mains voltage 10 % brightnessrecovery– Mode for parallel operation of several masterflush-mounted dimming actuators slave100 % brightnessfinal valueOFFDimming actuator - Operation modes:– Operation mode Normal operationStaircase lighting functionTiming functionOnly for staircase lighting function:– ON delay noyesOnly for ON delay:– Time base for ON delay approx. 130 ms / … / approx. 520 ms/ … / approx. 1.2 h– Factor for ON delay 10(2…127)– Time base for staircase lighting approx. 130 ms / … / approx. 4.2 sfunction/ … / approx. 1.2 h– Factor for staircase lighting function 43(2…127)– Enable time extension noyesOnly if “yes” is selected:– ON delay noyesOnly if “yes” is selected:– Time base for ON delay approx. 130 ms / … / approx. 520 ms/ … / approx. 1.2 h– Factor for ON delay 10(2…127)– OFF delay noyesOnly if “yes” is selected:– Time base for OFF delay approx. 130 ms / … / approx. 520 ms/ … / approx. 1.2 h– Factor for OFF delay 10(2…127)– Logic operation no logic operationAND functionOR function– Status response noyesMarch 2003 2 - 13
ABB i-bus ® EIB4-fold switch sensor solo ® , FMType: 6127-xxParametersThe default setting for the valuesis printed in bold type.Dimming rate:– Time base for passing through the approx. 0.5 msdimming rangeapprox. 8.0 msapprox. 130 msapprox. 2.1 sapprox. 33 s– Factor for passing through the 20dimming range– Note:Time base * Factor * 255Read-only memory:– Number of objects none1Only if “1” is selected:– Behaviour on receipt of an ON set preselected brightness valuetelegram– Brightness value for read-only OFF / 10 % / … / 30 % / … / 100 %memory (object no. 5 = ON)– Behaviour on receipt of an OFF no reactiontelegramset preselected brightness valueOnly for preselected brightness value:– Brightness value for read-only OFF / 10 % / 20 % / … / 100 %memory (object no. 5 = OFF)2 - 14 March 2003
Page 1 and 2: ABB i-bus ® EIB4-fold switch senso
Page 9 and 10: April 2012 Page 917. Promotion of b
Page 11: ABB i-bus ® EIB4-fold switch senso

ABB i-busÂ® EIB 4-fold switch sensor soloÂ®, FM Type: 6127-xx

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?