System configuration - Lantech Communications Global Inc

HTTP serverno security telnet G Disable IP security oftelnet serverswitch(config)#no security telnetPort Commands SetCommands Level Description Exampleinterface fastEthernet[Portid]G Choose the port formodification.switch(config)#interfacefastEthernet 2duplex[full | half]I Use the duplexconfigurationcommand to specifyswitch(config)#interfacefastEthernet 2switch(config-if)#duplex fullthe duplex mode ofoperation for FastEthernet.speed[10|100|1000|auto]I Use the speedconfigurationcommand to specifyswitch(config)#interfacefastEthernet 2switch(config-if)#speed 100the speed mode ofoperation for FastEthernet., the speedcan‘t be set to 1000 ifthe port isn‘t a gigaport..no flowcontrol I Disable flow control of switch(config-if)#no flowcontrolinterfacesecurity enable I Enable security ofinterfaceswitch(config)#interfacefastEthernet 2switch(config-if)#security enableno security I Disable security ofinterfaceswitch(config)#interfacefastEthernet 2switch(config-if)#no securitybandwidth type all I Set interface ingress switch(config)#interface30