System configuration - Lantech Communications Global Inc

static address table staticshow mac-address-tablefilterP Show filter MACaddress table.switch#show mac-address-tablefilterno mac-address-tablestatic hwaddr[MAC]I Remove an entry ofMAC address table ofinterface (static)switch(config)#interfacefastEthernet 2switch(config-if)#no mac-addresstablestatic hwaddr000012345678no mac-address-tablefilter hwaddrG Remove an entry ofMAC address tableswitch(config)#no mac-addresstablefilter hwaddr 000012348678[MAC](filter)no mac-address-table G Remove dynamic switch(config)#no mac-addresstableentry of MAC addresstableSNMP Commands SetCommands Level Description Examplesnmp system-name[System Name]G Set SNMP agentsystem nameswitch(config)#snmp systemnamel2switchsnmp system-location[System Location]G Set SNMP agentsystem locationswitch(config)#snmp systemlocationlabsnmp system-contact[System Contact]G Set SNMP agentsystem contactswitch(config)#snmp systemcontactwheresnmp agent-mode G Select the agent mode switch(config)#snmp agent-mode[v1v2c|v3|v1v2cv3]of SNMPv1v2cv3snmp communitystringsG Add SNMP community switch(config)#snmp community-[Community]string.strings public right rwright[RO/RW]snmp-server host[IP address]community[Community-string]G Configure SNMPserver hostinformation andcommunity stringswitch(config)#snmp-server host192.168.1.50 community publictrap-version v1(remove)40