System configuration - Lantech Communications Global Inc

Autostp-admin-edge[True|False]I Admin Edge of STPpriority on thisinterface.switch(config)#interfacefastEthernet 2switch(config-if)#stp-admin-edgeTruestp-admin-non-stp[True|False]I Admin NonSTP ofSTP priority on thisinterface.switch(config)#interfacefastEthernet 2switch(config-if)#stp-admin-nonstpFalseshow spanning-tree E Displays a summary of switch>show spanning-treethe spanning-treestates.no spanning-tree G Disable spanning-tree. switch(config)#no spanning-treeQOS Commands SetCommands Level Description Exampleqos policy[weighted-fair|strict]qos prioritytype[port-based|cos-only|tos-only|cos-first|tos-first]qos priority portbased[Port][lowest|low|middle|high]qos priority cos[Priority][lowest|low|middle|high]qos priority tos[Priority][lowest|low|middle|high]GGGGSelect QOS policyschedulingSetting of QOS prioritytypeConfigure Port-basedPriorityConfigure COSPriorityshow qos P Displays the38switch(config)#qos policyweighted-fairswitch(config)#qos prioritytypeswitch(config)#qos priorityportbased 1 lowswitch(config)#qos priority cos 0middleG Configure TOS Priority switch(config)#qos priority tos 3highinformation of QoSconfigurationSwitch#show qosno qos G Disable QoS function switch(config)#no qos