Manual MW-XF - Omni Instruments

More documents

Recommendations

Info

MW User’s ManualExemys9 Remote ConfigurationRemote configuration allows changing the GRD configuration without having to go to the sitewhere the GRD is installed. Take into account that the GRD must be connected to the MW to beable to use the remote configuration. If the GRD is not connected to the MW user the GRDconfigurator software or read the GRD user’s manual to know how to configure the GRD bySMS to establish a connection to the MW.To access to the remote configuration click on the “Open” button on the Configuration column.Figure 51 –Remote configurationThe main difference between configuring the GRD through the Remote Configuration and doingit through the GRD Configurator software is that, using the Remote Configuration, theparameters values must be read manually.To know further about the GRD configuration please read the GRD user’s manual.9.1 Connecting to the GRDIf the GRD is connected to the MW the first button will be enabled. If we pressed it you will GRDthe basic GRD information values and will be ready to start reading an writing the rest of theconfiguration.www.exemys.com Rev 2.1.0 - Junio 2009 44
MW User’s ManualExemysFigure 52 –Remote configuration commandsIf you are using a GRD with no IOs some buttons may not be enabled.9.1.1 MW Connection monitorFrom here we can get the signal level.Figure 53 –MW connection monitor9.1.2 Connection configurationHere we can see the connections configured parameters. It’s only possible to change theInactivity Time and the Retry Time.www.exemys.com Rev 2.1.0 - Junio 2009 45
Page 2 and 3: MW User’s ManualExemysThe Exemys
Page 4 and 5: MW User’s ManualExemys6 MW with G
Page 6 and 7: MW User’s ManualExemysFigure 53 -
Page 8 and 9: MW User’s ManualExemysClassificat
Page 10 and 11: MW User’s ManualExemysFigure 3 -M
Page 12 and 13: MW User’s ManualExemys2 Start-up2
Page 17 and 18: MW User’s ManualExemys3 MW Admini
Page 19 and 20: MW User’s ManualExemysWe can conf
Page 21 and 22: MW User’s ManualExemysdatabase is
Page 23 and 24: MW User’s ManualExemysMW informs
Page 25 and 26: MW User’s ManualExemys3.3 Remote
Page 31 and 32: MW User’s ManualExemysGRD’s ser
Page 33 and 34: MW User’s ManualExemys5.3 Final T
Page 35 and 36: MW User’s ManualExemysLet’s tak
Page 41 and 42: MW User’s ManualExemysThe table c
Page 43: MW User’s ManualExemysTo know if

Manual MW-XF - Omni Instruments

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?