13.07.2015 Views

A R B O R Wood Stove - Avalon

A R B O R Wood Stove - Avalon

A R B O R Wood Stove - Avalon

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Mobile Home Requirements<strong>Stove</strong> Installation (for qualified installers only) 15• Outside air must be installed - see "Outside Air Requirements" on page 13• Chimney connector and chimney must be one of the following types:AMERI-TEC model DCC connector with AMERI-TEC UL 103 HT chimneyDURAVENT model DVL connector with DURAVENT UL 103 HT chimneyGSW Super Chimney Twenty-One connected directly to applianceI.C.C. Excel HP connector with I.C.C. UL 103 HT chimneyMETALFAB model DW connector with METALFAB UL 103 HT chimneyOLIVER MACLEOD PROVENT model PV connector with OLIVER MACLEOD UL 103 HT chimneySECURITY model DP connector with SECURITY UL 103 HT chimneySELKIRK model DSP connector with SELKIRK UL 103 HT chimneyStandard Masonry Chimney with any one of the above listed connectorsNOTE: Reduced clearance connectors may not connect to the flue collar – an appliance adapter may be required.• <strong>Stove</strong> placement must maintain the following clearances to combustibles (drywall, furniture, etc.)EBDAMinimum Clearance(See the illustration above)Measure clearances from thenearest edge of the stove top.CFCReduced ClearanceConnectorA Sidewall to stove 18.00”B Backwall to stove 20.75”C Cornerwall to stove 14.00”D Connector to sidewall 28.25”E Connector to backwall 14.00”F Connector to cornerwall 17.50”Figure 11• If using offsets, use the connector clearance listed in Figure 12,not the connector manufacturer's clearance.• The appliance must be secured to the floor (consult yourbuilding official). Secure the outside air boot to the floor andstove to insure the stove does not dislocate.• Mobile home installations require a spark arrester at thechimney termination.• The appliance must be grounded to the chassis of the mobilehome (consult your building official).• WARNING:DO NOT INSTALL IN SLEEPING ROOM.• CAUTION:THE STRUCTURAL INTEGRITY OF THE MOBILEHOME FLOOR, WALL, AND CEILING/ROOF MUST BEMAINTAINED.12” Min.Connector Clearance(as outlined above)<strong>Stove</strong> Clearance(as outlined above)Figure 12© Travis Industries 100-01190_000 4070808

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!