A R B O R Wood Stove - Avalon

Bypass OperationOperating Your Appliance 21The bypass controls the flow of smoke inside the heater. When open, smoke goes directly up the flue,creating more draft. When closed, the smoke goes through the combustor, utilizing the secondarycombustion system and making the heater more efficient. When starting or re-loading the stove, open the bypass. Once the stove reaches full temperature – typically 45 minutes, close the bypass.To open the bypass, push on thelever and rotate the handle up.To close the bypass, simply rotate thehandle down.Bypass OPENUsed for startingand re-loadingBypass CLOSEDUsed for normaloperationLoading Lid OperationbOpen the bypass first (thishelps prevent smoke fromentering the room).cOpen the lid 1" for a fewseconds to allow air toenter the firebox.dLift the lid upward.WARNING: This partbecomes hot - use gloves.A log poker isprovided with thisstove. It attacheswith a clip to to theback of the stove.aOpen the air control and allow air to flowinto the firebox for 30 seconds.Do not wear loose clothing while re-loading the stove. Any item dangling above the opening may ignite.Carefully close the loading lid after use. Allowing it to “slam” shut may damage the stove.© Travis Industries 100-01190 4110915