download - Scotty Tele-Transport Corporation

Chapter 2Setting Up the System2.6.2 KIV-7 SetupThe SCOTTY APL-B system can operate two independent classifiedconnections using two KIV-7 encryption devices. The most common setup withthe KIV-7 is to operate one device at a call size of 64 k or at 128k.For using the KIV-7 encryption device directly in the APL-B setup togetherwith the “Crypto Bay” the KIV-7 unit has to be mounted into the KIV-7 tray(four screws are attached).In order to eliminate the slight connector position variations (connectorpositions are slightly different on each device) of the KIV-7 D-type connectorson the back panel of the device, SCOTTY has attached a special short bolt (twoper connector) to be screwed into the hexagons of each D-connector on theKIV-7. These bolts guide the KIV-7 tray into the D-connectors of the APL-Bcrypto docking station.Placing SCOTTY bolts into KIV-7 connectorsSCOTTY APL-B Users' Manual 19