EIS-2 & EIS-2-RJ - iServer Industrial MicroServer Manual - NEWPORT

PART 7APPROVALS INFORMATION7.1 Electrical Compatibility (EMC)This device comforms with requirements of EMC Directive 89/336/EEC, amendedby 93/68/EEC. This instrument complies with the following EMC ImmunityStandards as tested per EN 50082-2, 1995 (Industrial environment)Phenomena Test Specification Basic StandardElectrostatic +/- 4 kV contact discharge IEC 1000-4-2Discharge +/- 8 kV air discharge PerformanceCriteria BRadio Frequency 27 - 1000 MHz IEC 1000-4-3electromagnetic 10 V/m Performancefield. 80% AM (1 KHz) Criteria ARadio Frequency 900 MHz IEC 1000-4-3electromagnetic field. 10 V/m PerformancePulse modulated. 50% Duty cycle @ 200 Hz Criteria AFast Transients +/- 2 kV (ac mains) IEC 1000-4-4+/- 1 kV (dc, signal I/O) Performance5/50 ns Tr/Th, 5 KHz rep. freq. Criteria BRadio Frequency 0.15 - 80 MHz IEC 1000-4-6conducted 10 V/m Performance80% AM (1 KHz) Criteria AThis instrument complies with the following EMC Emission Standards as tested perEN 50081-1, 1992 (Residential, Commercial and Light Industrial)Phenomena Frequency Limits BasicRangeStandardRadiated 30-230 MHz 30 dB_V/m at 10 m CISPR 22Emission 230-1000 MHz 37 dB_V/m at 10 m Class Bquasi peakConducted 0.15-0.5 MHz 66-56 dB_V quasi peak CISPR 22Emission 0.5-5 MHz 56 dB_V quasi peak Class B5-30 MHz 60 dB_V quasi peakSafetyThis device conforms with Low Voltage Directive 73/23/EEC, amended by93/68/EEC. The following LVD requirements have been met to comply withEN 61010-1, 1993 (Electrical equipment for measurement, control andlaboratory use).Pollution Degree 2Class III Equipment (10-32 Vdc Low Power Option)7.2 FCCThis device complies with Part 15, Subpart B, Class B of the FCC rules40