R TraceTek Leak Detection Product Selection Guide for Water

More documents

Recommendations

Info

TraceTek Products for Water Detection in Commercial Buildings (continued)Product Catalog No. Selection DescriptionCircuit ComponentsEnd TerminationTT-MET-PC Modular End Termination Terminates sensing circuit; has pin-type plastic connector.(with plastic connector) Required at end of sensing circuit and all branches.Branching ConnectorTT-MBC-PC Modular Branching Allows a “T” or branch in the sensing circuit. Has one pin-Connector (with type connector to connect to cable from alarm module, twoplastic connectors) socket-type connectors to connect two branches. Wires thebranches in series and adds a simulated length of 15 fton each branch to make clear division between areas.Weighted LengthAccessoriesHold-down ClipsTagsToolsPortable Test BoxCrimp ToolPre-Packaged KitsComplete KitsISO 9001Raychem CorporationCommercial & IndustrialInfrastructure Division300 Constitution DriveMenlo Park, CA 94025-1164Tel (800) 545-6258Fax (800) 611-2323Fax-on-Demand (800) 329-4494ciinfo@raychem.comwww.raychem.comTT-WL-4.5M/15FT-PC Weighted Length Simulates 15 ft (4.5 m) of sensing cable. Makes a(with plastic connectors) clear division between separate areas in a locating system.TT-HDC-1/4/200-N/A No adhesive (200/bag) Hold-down clips attach cable to flat surfaces.TT-HDC-1/4Adhesive-backed (50/bag) Pressure-sensitive adhesive bonds to clean, flat surfaces.Use a clip for each 4 ft (1.3 m) of sensing cable.TT-TAG TraceTek Tags Tags to identify TraceTek sensing cable and recordmapped distance. Tag attaches to sensing cable byclosing on itself (like a cable tie). Package contains50 high-visibility yellow tags and a permanent marker.Use a tag on each length of cable and at mapping points.TT-PTB-1000 Portable Test Box Battery-operated device to test TraceTek sensing cables.Allows testing of anything from an individual length up to2000 ft (or 1000 m) of sensing cable. Useful for installationand maintenance.AD-1522-1 Crimp Tool Tool sized to properly crimp connectors in TT-JSK-HS18jumper splice kitTTC-KIT-1 25 ft of TT1000 Cable Each kit contains a TTC-1 alarm module, a modularTTC-KIT-2 50 ft of TT1000 Cable leader cable, a modular sensing cable of length indicated,a modular end termination, 15 hold-down clips, and 5 tags.The TraceTek Products Group is part of the Raychem Chemelex Division.Chemelex Division is ISO 9001 certified.All information, including illustrations, is believed to be reliable. Users, however, should independentlyevaluate the suitability of each product for their application. Raychem makes no warrantiesas to the accuracy or completeness of the information, and disclaims any liabilityregarding its use. Raychem’s only obligations are those in the Raychem Standard Terms andConditions of Sale for this product, and in no case will Raychem be liable for any incidental,indirect, or consequential damages arising from the sale, resale, use, or misuse of the product.Specifications are subject to change without notice. In addition, Raychem reserves the right tomake changes—without notification to Buyer—to materials or processing that do not affectcompliance with any applicable specification.© 1997 Raychem Corporation Printed in USA H53874 P/N 171269 3/97 TraceTek is a trademark of Raychem Corporation.
RTraceTek Leak DetectionProduct Selection Guide for Industrialand Environmental ApplicationsScope of This GuideThis guide will help you select TraceTekleak detection products for industrial andenvironmental applications. It coverssensing cables for a variety of liquids:• aqueous solutions• liquid fuels and oils• organic solventsThis guide includes products for applications(such as double-contained piping) thatrequire special fittings and installation tools.The product information complementsTraceTek application guides, which providedesign information specific to an application.For water sensing applications in commercialbuildings, refer to Selection GuideH53874. You may obtain other Raychemliterature from our Fax-on-Demand serviceat (800) 329-4494.I. Types of SystemsTraceTek leak detection is based on asimple operating principle, which makesseveral different types of systems possible.Modular DesignTraceTek leak detection is a versatilemodular system, with interchangeablecomponents that can be configured inmany different ways.TraceTek cables are available in standardlengths that plug together with no specialtools, making them easy to install. Cable isalso available in bulk for installation indouble containment piping, with kits (soldseparately) to install connectors on thecable at access points.The range of TraceTek alarm modules andmodular components allows you to tailorthe monitoring approach and layout to theapplication. The modular system designalso makes it easy to add to or modify thelayout in the future.The different types of TraceTek alarmmodules all trigger an alarm if liquid contactssensing cable connected to the module.Contents of This GuideThis guide is divided into five sections.I. Types of Systems profiles the types ofTraceTek monitoring systems available.II. Determining the Monitoring Approachreviews key considerations when definingthe scope of leak detection, and helpsyou decide on a monitoring approach tofit your application.III. Elements of a TraceTek System describesthe basic elements of a TraceTek leakdetection system and shows typicalsystem configurations.IV. Defining a Complete System outlines thesteps to lay out a complete TraceTekleak detection system.V. Product Listings shows the leak detectionproducts available and providestechnical and ordering information.However, each type of system hascharacteristics advantageous for differentapplications and layouts.Locating System- Can monitor one or more large areas orlengths.- Indicates leak location with its digitaldisplay; pinpoints the distance, not justthe area.- Is extremely useful for concealed or inaccessibleareas, such as double-containedpipes, covered trenches, and subfloors.- Integrates separate equipment or areasinto a single sensing circuit, thus reducingfield-wiring costs significantly.Virtually no limit to the amountof non-sensing jumper cable.Can have branchesupon branches, limitedonly by length of sensing circuit.All systems may use multiple types ofsensing cable in a single sensing circuit.Up to 5000 ft (1500 m) of sensingcable per locating module.Multiple-Channel Alarm System- Independently monitors as many as12 discrete channels; displays status ofeach channel separately.- Identifies any channel with a leak, butdoes not indicate distance to the leak.- Uses common alarm and relay contactsfor all channels.- Is well suited to tank and sumpapplications.Virtually no limit to the amountof non-sensing jumper cable.Separate wiringfor each channel.Up to 100 ft (30 m) of sensing cable per channel.Single-Channel Alarm System- Provides coverage for single small areas.- Is cost-effective for small installations.- Provides an independent system for aseparate area or operation.- Is useful for separate alarm annunciationor direct equipment control.Virtually no limit to the amountof non-sensing jumper cable.Up to 100 ft (30 m) of sensing cable.Drawingsnot to scale.1
Page 3: RRRPRODUCT SERVICERgeprüfteSicherh
Page 7 and 8: III. Elements of a TraceTek SystemA
Page 9 and 10: RRRRPRODUCT SERVICERgeprüfteSicher
Page 11 and 12: TraceTek Products for Industrial an
Page 13 and 14: ⁄⁄⁄⁄⁄ ⁄⁄ ⁄⁄ ⁄
Page 15 and 16: ⁄⁄⁄⁄⁄⁄⁄⁄⁄⁄⁄
Page 17 and 18: ⁄⁄⁄⁄⁄⁄⁄⁄⁄⁄⁄
Page 19 and 20: ⁄⁄⁄⁄⁄⁄⁄⁄⁄⁄⁄
Page 21 and 22: TTA-SIMTraceTek ® Alarm ModuleEasy
Page 23 and 24: TraceTekTTDMCH01 SIMSIM Normal13-Ma
Page 25 and 26: TT-NRMTraceTek Network Relay Module
Page 27 and 28: TTSIM-1ATraceTek ® Sensor Interfac
Page 29 and 30: GNDBLKYELACRS+ACSHLDRS-ACRTTSIM-1Tr
Page 31 and 32: RTTCTraceTek Sensing Module with Re
Page 33 and 34: R TraceTek ®Operating Principles f

R TraceTek Leak Detection Product Selection Guide for Water

Create successful ePaper yourself

Delete template?

Save as template?