TTS Golf RoToR oWNERS MANUAl - Hunter Industries

Important – Take note of how the G800 Valve Tool nests with the attached inlet valve. This will help later whenattaching the inlet valve to the tool prior to inlet valve installation.To disengage the inlet valve from the G800 Valve Tool, hold the inlet valve with one hand and the tool with the otherhand. Next, push the tool’s handle toward the inlet valve to compress the tool’s spring (fig 85). With the spring heldcompressed, rotate the tool’s handle counter-clockwise to release the tool’s hooks from the inlet valve.Inlet valve removal option 2 – Once the white lower snap-ring has been removed, the inlet valve is released and isready for removal. First notice the raised wall or rib that protrudes upward from the center of the inlet valve (fig 86).Use the 16” Needle-Nose Pliers Tool to grab this protruding rib firmly. While holding the protruding rib firmly with the16” Needle-Nose Pliers Tool, pull upward to disengage and remove the inlet valve from the rotor’s body (fig 87).Fig Fig 80 Fig 81 Fig 81Fig Fig 82 82Fig 80 Fig 81 Fig 82Fig 80 Fig 81 Fig 82Fig 83Fig 84Fig 85Fig 83 Fig 84 Fig 85Fig 83 Fig 83 Fig Fig 84 84 Fig 85Fig 86 Fig 87Fig 86 Fig 8729