School Bus Specifications - Texas Department of Public Safety

13. Mud flaps, with Brackets, mountedRubberized mud flaps, complete with brackets, shall be installed behindeach set of wheels. The mud flaps shall be comparable in size to the widthof rear wheel housing and shall reach within approximately eight (8) inchesoff the ground when the bus is empty. They shall be mounted at a distancefrom the wheels that will permit free access to spring hangers forlubrication, and to prevent their being pulled off when the bus is moving inreverse. Note: Mud flaps may display the manufacturer’s logo.a. _____ Rear mud flaps onlyb. _____ Both front and rear mud flaps14. Sound abatement insulation for engine compartmentExtra sound insulation for Type C buses (Shall reduce interior noise by 4decibels, minimum).15. Suspension, improved ride, mechanicalDesigned to provide an enhanced, more comfortable ride than standardsuspension. Rear axle only.16. Suspension, improved ride, airDesigned to provide an enhanced, more comfortable ride than standardsuspension. Rear axle only.17. Telescoping Steering WheelEasily adjustable for different size drivers. Can be changed by driver whileseated in driver’s seat. Note: May not be available on all size buses.18. Tires, mud and snow treadDesigned with a tread style for added traction in snow and/or mud. (Rearwheels only) (Not available on 14 - 30 passenger Type A chassis)19. Tow hooks, front and/or rearMounted tow hooks (loops are acceptable); with minimum horizontal pullcapacity of 13,500 pounds each. Tow eyes or hooks shall be attached sothey do not project beyond the front or rear bumper.Note: May not be available on all size buses.a. _____ Front only b. _____ Rear onlyc. _____ Both locations20. Transmission – extended warrantyVendor to state manufacturer’s basic months and mileage, and additionalmonths and mileage.Note: Optional full extended warranty, see Option 26.Section F-4