School Bus Specifications - Texas Department of Public Safety

58. Seat anchoragesEight (8) lower anchorages or lap belts are required on all school buses.State the number of additional anchorages needed ___________________.59. Storage - under body – locking luggage compartmentsUnder Body compartment for storage, with locking doors, keyed alikeopening to the outside of bus. Designed to carry passenger luggage and/orequipment.Note: This option may not be available depending on the bus type, enginelocation, size and increased fuel tank size.60. Storage – for drivers – locking in front headerLocking compartment designed to hold driver’s personal possessions.61. Storage – tool compartmentA metal container shall be provided for storage of tire chains, tow chains,and such tools as may be necessary for minor emergency repairs. Thisstorage container shall be located either inside or outside the passengercompartment and shall be equipped with a latch, no lock. However, if it islocated inside the passenger compartment, it shall be provided with aseparate cover, and shall be fastened to the floor in the right front or theright rear of the bus. A seat cushion shall not be used as this cover.a. _______ With locking door or lid62. State inspection and sticker prior to deliveryVendor completes all state or commercial required inspections necessary toput bus into service prior to delivery.a. _____ State safety inspectionb. _____ DOT commercial inspection63. Stop arm – higher visibilitya. _______ Strobe lightb. _______ Flashes & spells the word "STOP" in LED lightsc. _______ Two red LED lights flash on and offSection F-12