13.07.2015 Views

School Bus Specifications - Texas Department of Public Safety

School Bus Specifications - Texas Department of Public Safety

School Bus Specifications - Texas Department of Public Safety

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

SCHOOL BUS PURCHASER PRE-SERVICE CHECKLIST (continued)The following must be completed before this bus is placed into service.A. ENGINE COMPARTMENT Check and top-<strong>of</strong>f all fluid levels Check for Oil, Fuel, and Coolant leaks Check all belts for proper tensioning Check all belts for proper alignment Check freedom <strong>of</strong> throttle and ensure fullthrottle Check for unusual noises and/or vibrationsB. AIR CLEANER Check filter element positioning andtightness Check cover and hold-down clamps forretention Check air inlet pipe forclearance/obstructions Tighten all air induction system clampsC. TRANSMISSION Check for proper operation <strong>of</strong> neutral andreverse switches Check and top-<strong>of</strong>f all fluid levels Check for oil and coolant leaks Check hose fitting tightness Check for proper operation <strong>of</strong> shift systemD. BRAKE SYSTEM Check for any air leaks Check operation <strong>of</strong> park brake Check for leaks at wheels Check routing <strong>of</strong> airlines for clearanceE. STATE INSPECTION AND DRIVERSAREA State or DOT Inspection completed License plates installed All lights working Windshield washer operating Windshield wipers operating Heaters and defrosters working Seats securely bolted to the floor All publications includedF. STEERING SYSTEM Check hydraulic system for leaks & top-<strong>of</strong>f Check hose routing and clearance Check hose ends for leaks and tightness Check for cotter keys installed and propertyspread on all steering componentsG. REAR AXLE Check and top <strong>of</strong>f oil level Check for leaks Check for proper vent operationH. CAB AREA Triangular warning device mounted First Aid Kit mounted Bio Hazard Kit mounted Fire Extinguisher mounted and chargedI. FUEL SYSTEM Check fuel line routing for clearance,leakage, kinks and mounting tightnessJ. AIR CONDITIONING (if applicable) Check for proper operation and refrigerantleaksK. WHEELS AND TIRES Inspect tires for damage Check for proper inflationL. TORQUE ALL WHEEL NUTS Right front Left front Right rear Left rearCOMPLETED BY: __________________________________________ DATE: _______________NOTES: ________________________________________________________________________Section G-2

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!