Users Manual

CONTROLS AND FEATURESEnglishMPEG NRIf the receiving signal of MPEG has a grainednoise depending on the compression andconversion, the noise may be reduced whenusing this function.In the PICTURE menu, press ▲ or ▼ tohighlight Advanced Video and press ► orto enter.Press ▲ or ▼ to highlight NR and press► or to enter.Select the MPEG NR and press ◄ or ► toselect Low, Middle, High, or Off.DNRMPEG NRNRAutoLowActive BacklightWhen Active Backlight control is activated, it willautomatically optimise the backlighting levels fordark scenes.In the PICTURE menu, press ▼ tohighlight Advanced Video and press ► toenter.Press ▼ to highlight Active Backlight andpress ◄ or ► to select On or Off.Blue ScreenWhen Blue Screen is selected, the screen willturn blue and the sound will be muted when nosignal is received.In the PICTURE menu, press ▼ tohighlight Advanced Video and press ► orto enterPress ▼ to highlight Blue Screen and press◄ or ► to select On or Off.Select RETURN Back EXIT ExitCTIThe Colour Transient Improvement (CTI) involvesthe detection and sharpening of edges aroundcolour objects on the screen.In the PICTURE menu, press ▼ tohighlight Advanced Video and press ► orto enter.Select the CTI, and press◄ or ► to selectAuto or Off.Adaptive Luma ControlAutomatically adjusts the brightness and contrastafter analyzing the input signal. This functionenriches the colours and the depth of the picture.In the PICTURE menu, press ▼ tohighlight Advanced Video and press ► orto enter.Press ▼ to highlight Adaptive LumaControl and press ◄ or ► to adjust yourpreference.3D Colour ManagementWhen 3D Colour Management is selected, itallows the ‘Base Colour Adjustment’ feature tobecome available.In the PICTURE menu, press ▲ or ▼ tohighlight Advanced Video and press ► orto enter.Press ▲ or ▼ to highlight 3D ColourManagement.Advanced VideoCinema ModeOnNRCTIAutoAdaptive Luma ControlActive BacklightOnBlue ScreenOn3D Colour Management OffBase Colour AdjustmentClearFrameSelect RETURN Back EXIT ExitPress ◄ or ► to select On or Off.734