SERVICE MANUAL SERIES 360 EP SERIES 360 ES - Precisa

Series 360 EP / ESDismantling the weighing cellNote: Since the lug of the sensor mechanism is firmly attached to the balance arm, the sensor mechanismmust be unscrewed to dismantle the balance arm and gently tilted back:3. Unscrew 3 screws (30/A8) of the sensor mechanism and gently tilt the sensor mechanism to therear4. Remove the two inner assembly pins [9] → unscrew from the balance arm5. Remove the two outer assembly pins [9] → unscrew from the chassis6. Remove the two assembly jigs [7] + [8]7. Carefully tilt the balance arm over the pot and the sensor mechanism and take out8. Further dismantling of the weighing cell is unnecessaryPrecisa Gravimetrics AG Index - C8