IBM 5280 Distributed Data System - Index of

010 Start of Control String: Control code 010 indicates the start of a screen formatcontrol string, as follows:Byte Group 101 '0 I a I a I a ! 1 I 1 I 1 I l' 11.,' :8Control Codeo 1 = Begin this screen format at the current screen position.0= Begin this screen format at row 2, column 1.e Not used.e 1 = In enter mode, move prompts and display attributes to the screen, andmove data from the current record buffer to the screen. (In modes otherthan enter, this function is performed automaticr.llly.)CD 1 = Clear the screen (except the status line) before any function is performed.011 End of Control String: Code 011 indicates the end of the format control stringas follows:Byte Group 10Control Code1'0 I a I a I a I 1 I 1 I 1 I l' 11" Not used.e 1 = Sound the buzzer.• 1 = Clear the screen except for the status line.CD Not used.For a primary format, end of control string is processed at record advance time andduri~g a cancel ENTR operation (CNENTR). The status line counters, field shift,and hex display are set to blanks and external status condition 6 is posted to theobject program. For a secondary format, end of control string modifiers are ignored;end of control string indicates the end of the secondary format.104