IBM 5280 Distributed Data System - Index of

II Multivolume option for CLOZ. This affects the multivolume positions on theHDR1 label.Bits 20 and 21:00 = Leave multivolume as is, no option specified01 = Clear multivolume, * specified10 = Set continued volume, C specified11 = Set last volume, L specified00 = TTERMII Bits 22 and 23: Not used, always 00.II Multivolume number for CLOZ: The address of the binary register that containsthe volume number, or hex 00 if the multivolume OPtion is not specified.Hex 00 is also for TTERM.The TTERM instruction terminates the logical connection between the applicationprogram and the communications access method.The CLOZ instruction removes the data set lOB from the lOB chain and resets theQPen-flag in the lOB. If any records have been added, the EOD is updated asappropriate. Any functions specified in the operand fields of the CLOZ instructionare performed. When the CLOZ is completed, the op code in the lOB is reset to O.For an erase type data set, the block length, record length, and EOD are updated onthe HD R 1 label to the values in the lOB.Object Code Instruction Format 173