IM3004s User Guide v2.2.pdf - ICS-IQ.com

Chapter 4 - OperationSets the selected Load’s partition as Active (Bootable).• Partition TypeSets the selected Load’s partition as PRIMARY or LOGICAL.• ScaleSelecting this setting will allow the target partition to be auto scaled to drive’scapacity. If this setting is not selected, the target partition will not be scaled. Ifthe “Partition Size” setting is changed from its default value, the target drive’spartition will be scaled to the changed value.• SizeAllows the “Load” partition size to be manually adjusted. The default valueindicates the partition size created on the MultiMASSter drive. Leave as defaultvalue or change to the desired partition size.ApplySelecting Apply will activate the selected settings.CloseSelecting Close will close the MultiMASSter Selection Menu and starts theOperation.27