IM3004s User Guide v2.2.pdf - ICS-IQ.com
IM3004s User Guide v2.2.pdf - ICS-IQ.com
IM3004s User Guide v2.2.pdf - ICS-IQ.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 5 – Operational ProceduresSanitizing Drives Using WipeOut - <strong>User</strong>The Wipe Out <strong>User</strong> operation can be used to sanitize drives in one passrather than 7 passes which is required using the DoD Wipe Out method.Caution: Any drive in the MASTER location will also be sanitized.1. The Advanced Interface Control Console will be displayed after the unit ispowered ON.2. Connect and configure the drives as outlined in the “Quick Start” and “Prepare toCopy” sections of the manual.3. Select WipeOut from the Operation pull down menu, located in the MainScreen.4. Select <strong>User</strong> as the Operational Mode setting.5. Set the Operational Mode Settings which are dynamically displayed in theOperation’s Main Screen. See Table 8 for re<strong>com</strong>mended settings.6. Verify the Common Settings located in the Settings Screen. See Table 3 forre<strong>com</strong>mended settings.7. Select the drives to be used for the selected operation from the Drive SelectionPanel.8. Select Start from the Main Screen to begin the operation. The Source driveshould be listed in the Source Drive panel’s list, and the Target drive(s) should belisted in the Destination Drives panel’s list.WipeOut DoD SETTINGSTable 8Menu ItemRe<strong>com</strong>mended SettingCopy ModeWipeOutReadBack-VerifyDisable (Optional)WipeOut Mode<strong>User</strong>Iterations 0Pattern 032
Change language