Pendleton (745-790) Owner's Manual - Avalon

16 Stove Installation (for qualified installers only)HearthStoveDirectConnectionNOTE:Directconnectionsrequire installationof an airtight, noncombustibleblock-off plate ordamper adapter.NOTE: The chimney must have a claytile liner. If it does not, the installationmust use a positive connection (fullreline). The entire fireplace andchimney must be clean, undamaged,and meet all local building codes (UBC,etc.). Damage must be repaired priorto installation. The chimney must be15' to 33' tall.Max. 8”Combustible MantleFloor Protection(See the section "FloorProtection Requirements"for more details)Min. 18"ClayLinerStainless steelchimney connectormust Extend 1' pastthe block-off plate orto the flue linerAirtightInsulatedClean-OutRemove damperor wire it openBlock-off plate ordamper adapterSee the section"Stove PlacementRequirements" forminimum clearancesrequired.Interior orExteriorMasonryChimneyNOTE:This type ofinstallationrequires a UBCapprovedmasonryconnector or afactory built (U.L.Listed) wallthimble.NOTE: The chimney must have aclay tile liner. If it does not, theinstallation must use a positiveconnection (full reline). Theentire fireplace and chimney mustbe clean, undamaged, and meetall local building codes (UBC,etc.). Damage must be repairedprior to installation. The chimneymust be 15' to 33' tall.See the section "StovePlacement Requirements" forminimum clearances required.Chimney connector sectionsMin. 18"clearanceto ceilingClay LinerThis type ofinstallation requiresa UBC approvedmasonry connectoror a factory built(U.L. Listed) wallthimble.See the section"Floor ProtectionRequirements"Make sure theclean-out seals inplace.Travis Industries 93508133 4020509