AccuStandard®

Water Pollution (WP) Inorganic & Petroleumfor AccuTest & AccuValueSelf-TestWater Pollution (WP) / DMR-QA Inorganic ParametersWP-PT CyanideIPE-CN-002-AT$ 32 / 20 mLIPE-CN-002-AV$ 32 / 20 mLSample conc. after prepContains analyte listed belowAnalyte ListSample rangeTotal Cyanide0.02-1.2 mg/LWP-PT Inorganic HardnessIPE-HARD-002-AT$ 35 / 20 mLIPE-HARD-002-AV$ 35 / 20 mLSample conc. after prepContains 4 analytes listed belowAnalyte ListSample rangeCalcium3.5-150 mg/LMagnesium0.5-50 mg/LTotal Hardness as CaCO 3 15-600 mg/LCa Hardness as CaCO 3 15- 575 mg/LWP-PT Trace MetalsIPE-MET-003-AT$ 47 / 2 x 20 mLIPE-MET-003-AV$ 47 / 2 x 20 mLSample conc. after prepContains 23 analytes listed belowAnalyte ListSample rangeAluminum50-4500 µg/LAntimony10-1000 µg/LArsenic10-1000 µg/LBarium50-3500 µg/LBeryllium5-1000 µg/LBoron50-2500 µg/LCadmium5-1000 µg/LChromium15-1500 µg/LCobalt10-1500 µg/LCopper10-1000 µg/LIron25-4500 µg/LLead30-4000 µg/LManganese50-4500 µg/LMercury0.5-40 µg/LMolybdenum20-700 µg/LNickel50-3500 µg/LSelenium20-2500 µg/LSilver10-750 µg/LStrontium2-1000 µg/LThallium10-1000 µg/LTitanium25-500 µg/LVanadium50-11500 µg/LZinc25-2500 µg/LWP-PT Inorganic MineralsIPE-MIN-005-AT$ 53 / 2 x 20 mLIPE-MIN-005-AV$ 53 / 2 x 20 mLSample conc. after prepContains 12 analytes listed belowAnalyte ListSample rangeAlkalinity as CaCO 3 5-150 mg/LCalcium2-150 mg/LChloride10-500 mg/LConductivity25- 2500 µmhosTotal Dissolved Solids 25-2400 mg/LFluoride0.2-10 mg/LTotal Hardness as CaCO 3 15- 600 mg/LCa Hardness as CaCO 3 15- 575 mg/LMagnesium0.5-50 mg/LPotassium2-250 mg/LSodium5 -500 mg/LSulfate2-600 mg/LWP-PT DemandIPE-MIN-006-AT$ 42 / 20 mLIPE-MIN-006-AV$ 42 / 20 mLSample conc. after prepContains 4 analytes listed belowAnalyte ListSample rangeCOD10-500 mg/LBOD10-275 mg/LcBOD10-275 mg/LTOC5-125 mg/LWP-PT Nutrients #1IPE-MIN-007-AT$ 22 / 20 mLIPE-MIN-007-AV$ 22 / 20 mLSample conc. after prepContains 3 analytes listed belowAnalyte ListSample rangeNitrate-N0.2-50 mg/LAmmonia-N0.1-20 mg/LOrthoPhosphate- P 0.01-6 mg/LWP-PT Nutrients #2IPE-MIN-008-AT$ 22 / 20 mLIPE-MIN-008-AV$ 22 / 20 mLSample conc. after prepContains both analytes listed belowAnalyte ListSample rangeTotal Phosphorous0.10-15 mg/LTotal Kjeldahl nitrogen as N 0.3-40 mg/LWP-PT Oil & Grease & TotalPetroleum Hydrocarbon (TPH)IPE-OILG-001-AT *$ 32 / 5 mLIPE-OILG-001-AV *$ 32 / 5 mLSample conc. after prepContains 2 analytes listed below* Designed forNELAC/CAAnalyte ListSample rangeTotal Oil & Grease 5-100 mg/LTPH5-100 mg/LWP-PT pHTechnical NoteTo be used by gravimetric oil and greasemethods. In addition, this PT sample can nowbe used for TPH analysis by gravimetricmethods including the EPA method 1664. Thesample contains analytes typically present inthe environment.IPE-PH-001-AT$ 27 / 20 mLIPE-PH-001-AV$ 27 / 20 mLSample conc. after prepContains analyte listed belowAnalyte ListSample rangepH2-12 unitsWP-PT Total PhenolicsIPE-PHEN-001-AT$ 32 / 20 mLIPE-PHEN-001-AV$ 32 / 20 mLSample conc. after prepContains analyte listed belowAnalyte ListSample rangeTotal Phenolics0.03-6 mg/LWP-PT Inorganic SolidsIPE-SOL-002-AT$ 37 / 4 mLIPE-SOL-002-AV$ 37 / 4 mLSample conc. after prepContains 3 analytes listed belowAnalyte ListSample rangeSuspended Solids 5-200 mg/LDissolved Solids25-2400 mg/LTotal Solids30-3000 mg/LWP-PT Total Residual ChlorineIPE-TRC-002-AT$ 32 / 20 mLIPE-TRC-002-AV$ 32 / 20 mLSample conc. after prepContains analyte listed belowAnalyte ListSample rangeTotal Residual Chlorine 0.10-6.0 mg/LPT Water Pollution InorganicTel. 800-442-5290 / 203-786-5290 • Fax 203-786-5287 • Web AccuStandard.com 25