AccuStandard®

ASTMPhysical PropertiesASTM D1319 Calibration Standards by Fluorescent Indicator Adsorption FIAOlefin FIA Calibration CurveFIA-CAL-SET$ 350 / Set of 7 x 1 mLStd. 1 Std. 2 Std. 3 Std. 4 Std. 5 Std. 6 Std. 7Target Vol. % Vol. % Vol. % Vol. % Vol. % Vol. % Vol. %Total Olefins 2.0 4.0 5.0 6.0 8.0 10.0 12.0Total Paraffins 57.0 55.0 52.0 51.0 45.0 45.0 40.0Total Aromatics 23.0 24.0 25.0 26.0 29.0 28.0 30.0Total Oxygenate 18.0 17.0 18.0 17.0 18.0 17.0 18.0Cat. No. Price / 1 mLStandard 1 FIA-CAL-01 $ 60Standard 2 FIA-CAL-02 60Standard 3 FIA-CAL-03 60Standard 4 FIA-CAL-04 60Standard 5 FIA-CAL-05 60Standard 6 FIA-CAL-06 60Standard 7 FIA-CAL-07 60FIA Olefin StandardFIA-OLEFIA-OLE-5MLVol. %1-Pentene 33.32,3-Dimethyl-2-butene 33.3D1319MeetsEPA Guidelinesfor RFGAnalysis$ 45 / 1 x 1 mL$ 135 / 1 x 5 mL3 comps.Vol. %1-Heptene 33.3Technical NoteThese standards have beenprepared for the determination ofaromatics, olefins, oxygenates andsaturates in petroleum fractions byFluorescent Indicator Adsorption(FIA) IP designation 156/95.The certificate for the FIA calibrationcurve lists both the volume percentsfor the hydrocarbon types and theindividual volume percents for eachanalyte in the functional group.The weight fraction for eachhydrocarbon type and individualanalyte is also listed on thecertificate.FIA Paraffin StandardFIA-PARFIA-PAR-5MLVol. %n-Pentane 8n-Hexane 9Cyclohexane 15n-Heptane 14$ 35 / 1 x 1 mL$ 115 / 1 x 5 mL8 comps.Vol. %2,3-Dimethylpentane 14Isooctane 16n-Octane 14n-Decane 7FIA Aromatic StandardFIA-AROFIA-ARO-5MLVol. %Benzene 4Toluene 32Ethylbenzene 8p-Xylene 8o-Xylene 8$ 35 / 1 x 1 mL$ 115 / 1 x 5 mL10 comps.Vol. %m-Xylene 161,2,4-Trimethylbenzene 81,3,5-Trimethylbenzene 81,2,4,5-Tetramethylbenzene 4Naphthalene 4ASTM D1744, E1064, D4377 Water in Liquid Petroleum Products by Karl Fischer D4928, D6304Standards are available for coulometric Karl Fischer titrations and are packaged in 2 mL, 5 mL, and 20 mLampules in sets of 5 and 10. The following concentrations are available:Description Cat. No. Price / UnitWater content 60 µg/g KF-0.6X-5ML-VAP $ 65 / 10 x 5 mLWater content 100 µg/g KF-1X-2ML-VAP 40 / 10 x 2 mLKF-1X-5ML-VAP 45 / 10 x 5 mLKF-1X-20ML-PAK 50 / 5 x 20 mLWater content 1000 µg/g KF-10X-2ML-VAP 40 / 10 x 2 mLKF-10X-5ML-VAP 45 / 10 x 5 mLKF-10X-20ML-PAK 50 / 5 x 20 mLWater content 5000 µg/g KF-50X-2ML-VAP 40 / 10 x 2 mLKF-50X-5ML-VAP 45 / 10 x 5 mLKF-50X-20ML-PAK 50 / 5 x 20 mLValue Added Paks (Cat. No.’s ending in -VAP) provide multiple singleunits packaged together for both greater stability and cost savings.Value Added PAKPackaged in ready to usequantities.Karl Fischer titratorASTM Physical PropertiesASTM D2386 Freezing Points Calibration StandardsNominal Freezing Point Cat. No. Price / Unit- 50 °C ASTM-P-129-01 $ 110 / 250 mL- 45 °C ASTM-P-129-02 110 / 250 mLASTM D2500 Cloud Point Calibration StandardsCloud Point, Approx. Value Cat. No. Price / Unit+ 5 °C ASTM-P-131-01 $ 110 / 250 mL- 2 °C ASTM-P-131-02 110 / 250 mL- 10 °C ASTM-P-131-03 110 / 250 mL- 15 °C ASTM-P-131-04 110 / 250 mL- 20 °C ASTM-P-131-05 110 / 250 mLAccuStandard stands foraccuracy in Cloud Points.Tel. 800-442-5290 / 203-786-5290 • Fax 203-786-5287 • AccuStandard.com 279