AccuStandard®

ASTMSimulated Distillation (SIM DIS)Simulated Distillation (SIM DIS) and Proposed Motor Oil Volatility MethodAccuStandard has developed an extensive line of SIM DIS standards for normal and high temperature analytical requirements when generatingboiling point versus retention time calibration curves. Since normal paraffins above Alkane C60 are not readily available, Polywax 500, 655, 850 and1000 standards have been incorporated to perform SIM DIS analysis of heavy petroleum fractions with boiling points up to 1350°F.SIM DIS Simulated Distillation StandardsStock SIM DIS Paraffin SolutionASTM-P-0050Wt. %n-Pentane 6.66n-Hexane 6.66n-Heptane 6.66n-Octane 6.66n-Nonane 6.66n-Decane 6.66n-Undecane 6.66$ 85 / 1 x 5 mL14 comps.Wt. %n-Dodecane 13.33n-Tetradecane 6.66n-Pentadecane 6.66n-Hexadecane 6.66n-Heptadecane 6.66n-Octadecane 6.66n-Eicosane 6.66Working Level SIM DIS Paraffin Solutionwith Polywax 500ASTM-P-0052$ 40 / 1 x 1 mLASTM-P-0052-PAKSAVE 20% $ 160 / 5 x 1 mLAt stated conc. in Carbon disulfide15 comps.Wt. %n-Pentane 0.0333n-Hexane 0.0333n-Heptane 0.0333n-Octane 0.0333n-Nonane 0.0333n-Decane 0.0333n-Undecane 0.0333n-Dodecane 0.0666Standards of InterestWt. %n-Tetradecane 0.0333n-Pentadecane 0.0333n-Hexadecane 0.0333n-Heptadecane 0.0333n-Octadecane 0.0333n-Eicosane 0.0333Polywax 500 0.5See ASTM Methods D3710, D5307, D5442, D6352 for additional calibration standards for hydrocarbon analysis.Polywax 850 ®ASTM-P-0137N-2GPolywax 850Polywax 1000 ®ASTM-P-0138N-2GPolywax 1000Polywax 500 ®ASTM-P-0051N-2GPolywax 500Polywax 655 ®ASTM-P-0053N-2G$ 20 / 2 grams$ 20 / 2 grams$ 20 / 2 grams$ 20 / 2 gramsPolywax 655ASTM D3120 & D3246 Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative MicrocoulometrySulfur Calibration SetD-3120-92-CAL-SETIn IsooctaneSulfur Conc. Sulfur Wt. % Cat. No (1 mL)Blank ——— D-3120-92-BL1 µg/g 0.0001 D-3120-92-1X3 µg/g 0.0003 D-3120-92-3X10 µg/g 0.0010 D-3120-92-10XASTM D3230 Determination of Salts in Crude OilASTM D3231 Determination of Phosphorus in Gasoline$ 75 / set of 8 x 1 mLSulfur Conc. Sulfur Wt. % Cat. No (1 mL)30 µg/g 0.0030 D-3120-92-30X50 µg/g 0.0050 D-3120-92-50X75 µg/g 0.0075 D-3120-92-75X100 µg/g 0.010 D-3120-92-100XTechnical NoteWell characterized di-n-butyl sulfide is used in alow sulfur Isooctane matrix for this calibration set.see ASTM methods in Inorganic Table of Contentssee Single Element ICP standards in Inorganic Table of ContentsASTM D3120-D3605 SIM DISASTM D3237 Lead in Gasoline by AA SpectroscopyASTM D3246 Sulfur in Petroleum Gas by Oxidative MicrocoulometryASTM D3340 Li & Na in Lubricating Greases by Flame Photometersee ASTM methods in Inorganic Table of Contentssee Table of Contents for Sulfur Standardssee Single Element AA standards in Inorganic Table of ContentsASTM D3524 Diesel Fuel Diluent in Used Diesel Engine Oils by GCCalibration CurveD-3524-CAL-5ML-SET$ 150 / 6 x 5 mLD-3524-CAL-10ML-SET$ 250 / 6 x 10 mLAnalyte Std. 1 Std. 2 Std. 3 Std. 4 Std. 5 Std. 6Target Wt. % Target Wt. % Target Wt. % Target Wt. % Target Wt. % Target Wt. %# 2 Diesel 10 7.5 5.0 2.5 1.0 030 W Motor oil 90 92.5 95 97.5 99 100Internal StandardD-3524-IS-10ML$ 20 / 1 x 10 mLD-3524-IS-10ML-PAK SAVE 20% $ 100 / 5 x 10 mLAt stated conc. in n-Heptane2 comps.Wt./Wt. %n-Decane 1.0n-Octadecane 0.2Mid Level Daily QC SolutionD-3524-QC-10MLAt stated conc.Wt. / Wt. %# 2 Diesel 5.030 W Motor oil 95.0$ 30 / 1 x 10 mL2 comps.Column Resolution MixD-3524-CR$ 10 / 1 x 1 mLD-3524-CR-PAK SAVE 20% $ 40 / 5 x 1 mLAt stated conc. in n-Heptane2 comps.Wt. / Wt. %n-Hexadecane 1.0n-Octadecane 1.0ASTM D3605 Trace Metals in Gas Turbine Fuels by AA & Flame Emission & Spectroscopysee ASTM methods in Inorganic T of CTel. 800-442-5290 / 203-786-5290 • Fax 203-786-5287 • AccuStandard.com287