AccuStandard®

ICPMulti-Element QC & Second Source QCQuality Control Standards can be used for many different applications. AccuTrace QC Standards are ideal for calibration when performing NPDESmonitoring requirements and can be used for standard curve checks, inter-element correction methods, interference checks or any other uniqueapplication.QC Standard #1QC Standard #3QC Standard #5QCS-01-1$ 182 / 100 mLQCS-01-5$ 354 / 500 mL100 µg/mL each in 5% HNO 3 tr. HF 23 comps.Sb (Antimony)As (Arsenic)Be (Beryllium)Cd (Cadmium)Ca (Calcium)Cr (Chromium)Co (Cobalt)Cu (Copper)Fe (Iron)Pb (Lead)Li (Lithium)Mg (Magnesium)QC Standard #2Quality Control StandardsQCS-03-1$ 135 / 100 mLQCS-03-5$ 264 / 500 mL100 µg/mL each in 5% HNO 3 15 comps.QCS-05-1$ 109 / 100 mLAt stated conc. (µg/mL) in 2% HNO 3 3 comps.Li (Lithium) 250K (Potassium) 10,000Na (Sodium) 1000QC Standard #6Ba (Barium)QC Standard #4QCS-04-1$ 176 / 100 mLAt stated conc. (µg/mL) in 5% HNO 3 19 comps.Si (Silicon) †Ag (Silver)Na (Sodium)† 214 µg/mL as SiO 2QCS-06-1$ 109 / 100 mL1000 µg/mL each in 2% HNO 3 4 comps.Al (Aluminum) 100QCS-02-1$ 89 / 100 mLBa (Barium) 5QCS-02-5$ 174 / 500 mLBe (Beryllium) 1At stated conc. (µg/mL) in 5% HNO 3 tr. HFBi (Bismuth) 200Quality Control Standards Sets7 compsB (Boron) 15Al (Aluminum) 100QCS-1-SET $ 325 / 3 x 100 mLCd (Cadmium) 20Ba (Barium) 100Cr (Chromium) 25QCS-01-1 QCS-02-1 QCS-03-1B (Boron) 100Co (Cobalt) 20K (Potassium) 1000Cu (Copper) 20QCS-5-SET$ 635 / 3 x 500 mLSi (Silicon) † 500Ga (Gallium) 150Ag (Silver) 50QCS-01-5 QCS-02-5 QCS-03-5In (Indium) 200Na (Sodium) 100Fe (Iron) 15† 1070 µg/mL as SiO 2Pb (Lead) 200Mn (Manganese) 5Ni (Nickel) 50Ag (Silver) 50QC Standard #2RSr (Strontium) 1QCS-02-R1-1$ 89 / 100 mLTl (Thallium) 40QCS-02-R1-5$ 174 / 500 mLZn (Zinc) 20100 µg/mL each in 5% HNO 3 tr. HF 7 comps.Al (Aluminum)Ba (Barium)B (Boron)K (Potassium)Mn (Manganese)Mo (Molybdenum)Ni (Nickel)P (Phosphorus)Se (Selenium)Sr (Strontium)Tl (Thallium)Sn (Tin)Ti (Titanium)V (Vanadium)Zn (Zinc)Al (Aluminum)Ba (Barium)Cd (Cadmium)Ca (Calcium)Cr (Chromium)Co (Cobalt)Cu (Copper)Fe (Iron)Pb (Lead)Mg (Magnesium)Mn (Manganese)Ni (Nickel)Na (Sodium)Ti (Titanium)Zn (Zinc)Ca (Calcium)Mg (Magnesium)Sr (Strontium)Second Source QC StandardsICP Multi-ElementThese Alternative Source Line Standards exactly match a formulation from another source you may be already using. Our ASL formulations save youthe cost of a custom formulation by providing you with true independent lots.Second Source QC Standard #1QCS-ASL-7-1$ 85 / 1 x 100 mLQCS-ASL-7-5$ 165 / 1 x 500 mLAt stated conc. (µg/mL) in 2-5% HNO 3 tr. HF7 comps.Al (Aluminum) 100Ba (Barium) 100B (Boron) 100K (Potassium) 1000Si (Silicon) 50Ag (Silver) 100Na (Sodium) 100Second Source QC Standard #2QCS-ASL-21-1$ 190 / 1 x 100 mLQCS-ASL-21-5$ 370 / 1 x 500 mL100 µg/mL each in 2-5% HNO 3 tr. HF 21 comps.Sb (Antimony)As (Arsenic)Be (Beryllium)Cd (Cadmium)Ca (Calcium)Cr (Chromium)Co (Cobalt)Cu (Copper)Fe (Iron)Pb (Lead)Li (Lithium)Mg (Magnesium)Mn (Manganese)Mo (Molybdenum)Ni (Nickel)Se (Selenium)Sr (Strontium)Tl (Thallium)Ti (Titanium)V (Vanadium)Zn (Zinc)■ NIST Traceable■ Independent Lots■ Exact MatchMatch Other Supplier’sProducts.Use as a True SecondSource.These products require a Hazardous Shipping Fee except products marked with an asterisk *372 AccuStandard is accredited to ISO/IEC 17025 and certified to ISO 9001