Liebert Mini-Mate2, 8 Ton - Emerson Network Power
Liebert Mini-Mate2, 8 Ton - Emerson Network Power
Liebert Mini-Mate2, 8 Ton - Emerson Network Power
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Figure 13 Indoor air-cooled centrifugal condensing unit dimensions and pipe connections<br />
Customer supplied<br />
threaded rods for module<br />
support from ceiling (1/2"<br />
minimum diameter<br />
recommended) (typ. 4).<br />
13/16"<br />
(21mm)<br />
23 7/8 "<br />
(606mm)<br />
NOTE: Unit is spaced evenly in<br />
reference to threaded<br />
rod centers.<br />
Single Point <strong>Power</strong> Kit<br />
connection from Evaporator.<br />
System 1 (3<strong>Ton</strong>) Suction Line Connection,<br />
Aeroquip #11 Male.<br />
System 2 (5<strong>Ton</strong>) Suction Line Connection,<br />
Aeroquip #12 Male.<br />
System 1 (3<strong>Ton</strong>) Liquid Line Connection,<br />
Aeroquip #6 Male.<br />
System 2 (5<strong>Ton</strong>) Liquid Line Connection,<br />
Aeroquip #10 Male.<br />
42 17/32 "<br />
(1080.3mm)<br />
THREADED ROD<br />
CENTERS<br />
66 9/32 "<br />
(1683.5mm)<br />
CABINET<br />
DIMENSION<br />
59 13/16 "<br />
(1519mm)<br />
9/16" (14mm) dia. holes for<br />
threaded rods (typ. 2 each end)<br />
Air Inlet<br />
1 13/16 "<br />
(40mm)<br />
7/8" (22.2mm) dia. knockout<br />
electrical entrance for alternate<br />
control panel low voltage routing.<br />
21<br />
Air Outlet<br />
40 5/32 "<br />
(1020mm)<br />
CABINET<br />
DIMENSION<br />
64 1/4 "<br />
(1632mm)<br />
THREADED ROD<br />
CENTERS<br />
19 1/32 "<br />
(483mm)<br />
Hanger<br />
Bracket<br />
7/8" (22.2mm) dia. electrical entrance<br />
for low voltage connection.<br />
Site Preparation and Installation<br />
8 13/16 "<br />
(224mm)<br />
16 5/16 "<br />
(414mm)<br />
1 3/32 "<br />
(26mm)<br />
26 3/8 "<br />
(670mm)<br />
Shaded area indicates a<br />
recommended clearance of<br />
30" (762mm) for component<br />
access and removal.<br />
7/8" (22mm) & 1 1/8" (29mm)<br />
dia. knockouts electrical entrance<br />
for high voltage connection<br />
DPN000248_Rev1