Liebert Mini-Mate2, 8 Ton - Emerson Network Power

More documents

Recommendations

Info

Figure 22 Optional free cooling coil (3-way valve) on air-cooled units SL-11088Pg12 32 Site Preparation and Installation
2.9 Checklist for Completed Installation 33 Site Preparation and Installation ___ 1. Proper clearance for service access has been maintained around the equipment. ___ 2. Equipment is level and lock-nuts are installed with the leveling nuts on the spring isolators. ___ 3. Piping completed to refrigerant or coolant loop (if required). Refrigerant charge added (if required). ___ 4. Condensate pump installed (if required). ___ 5. Drain line Connected. ___ 6. Water supply line connected to humidifier (if required). Route to allow air filter removal. ___ 7. Field provided pan with drain installed under all cooling units and water/glycol condensing units. ___ 8. Filter box installed. ___ 9. Ducting completed. ___ 10. Filter(s) installed in return air duct. ___ 11. Line voltage to power wiring matches equipment serial tag. ___ 12. <strong>Power</strong> wiring connections completed and phased correctly between disconnect switch, evaporator, and condensing unit, including earth ground. ___ 13. <strong>Power</strong> line circuit breakers or fuses have proper ratings for equipment installed. ___ 14. Control wiring connections completed to evaporator and condensing unit (if required, including wiring to wall-mounted control panel and optional controls). ___ 15. Control panel DIP switches set based on customer requirements. ___ 16. All wiring connections are tight. ___ 17. Foreign materials have been removed from in and around all equipment installed (shipping materials, construction materials, tools, etc.) ___ 18. Fans and blowers rotate freely without unusual noise. ___ 19. Inspect all piping connections for leaks during initial operations. Correct as needed.
Page 1: Liebert Mini-Mate2 User Manual - 8
Page 4 and 5: 2.7 Indoor Water- and Glycol-Cooled
Page 6 and 7: FIGURES Figure 1 System configurati
Page 9 and 10: 1.0 PRODUCT FEATURES 1.1 Standard P
Page 11 and 12: 1.3 Ancillary (Ship Loose Accessori
Page 13 and 14: 2.1.2 Location Considerations ! 5 S
Page 15 and 16: Figure 3 System Configurations—ch
Page 17 and 18: 9 Site Preparation and Installation
Page 19 and 20: 2.4.3 Piping Connections and Coolan
Page 21 and 22: Chilled-Water Piping—Chilled-wate
Page 23 and 24: 15 Site Preparation and Installatio
Page 25 and 26: 17 Site Preparation and Installatio
Page 27 and 28: 2.5 Indoor Air-Cooled Centrifugal F
Page 29 and 30: Figure 13 Indoor air-cooled centrif
Page 31 and 32: 2.6 Outdoor Air-Cooled Condensing U
Page 33 and 34: Figure 16 Footprint dimensions - ou
Page 35 and 36: 2.7 Indoor Water- and Glycol-Cooled
Page 37 and 38: Figure 19 Indoor water/glycol conde
Page 39: 2.8 Optional Equipment Piping 2.8.1
Page 43 and 44: 3.2 Main Menu 35 Microprocessor Co
Page 45 and 46: 3.7 Time 3.8 Date 37 Microprocessor
Page 47 and 48: 3.10.7 CW Flush (For Systems With a
Page 49 and 50: 3.17 Custom Text 41 Microprocessor
Page 51 and 52: Test Micro 43 Microprocessor Contro
Page 53 and 54: 4.0 SYSTEM PERFORMANCE MICROPROCESS
Page 55 and 56: 5.0 ALARMS 47 Alarms The microproce
Page 57 and 58: 5.2 Optional/Custom Alarms 5.2.1 Ch
Page 59 and 60: 6.2 Maintenance and Component Opera
Page 61 and 62: Regulating Valves (Water/Glycol Con
Page 63 and 64: 6.2.6 Steam Generating Humidifier -
Page 65 and 66: 7.0 MAINTENANCE INSPECTION CHECKLIS
Page 67 and 68: Table 18 Troubleshooting (continued
Page 69 and 70: 61 Troubleshooting
Page 72: Ensuring The High Availability 0f M

Liebert Mini-Mate2, 8 Ton - Emerson Network Power

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?