Smart Industry 1/2016

AVNET SILICA SMART SOLUTIONS
DV164140-1
LORA ® Technology Evaluation
Kit – 800
The LoRa® Network
Evaluation Kit makes it
easy for customers to
test LoRa technology,
range and data rate. The
full-featured gateway
board includes an LCD
screen, SD Card for
Config Data, Ethernet
connection, 868 MHz
antenna, and full-band capture radios. The Gateway evaluation kit
also includes two RN2483 Mote boards (Part # DM164138).
The gateway uses a local version of the LoRaWAN network server
running under Windows so it does not need an external network
connection. This creates a self-contained demo network that makes
testing the LoRa network quick and easy. Features:
● Everything needed to develop a LoRaWAN Network
● 868 MHz Evaluation Kit
● Includes a 6-channel Gateway and two Motes
● Local LoRaWAN Network/Application Server
● GUI for configuration and testing (Windows, Linux and Mac OS)
MAXREFDES143#
DeepCover Embedded Security in
an IoT Authenticated Sensing
& Notification Reference Design
As technology is enabling more embedded devices to connect to the Internet,
security emerges as a paramount feature to protect industrial equipment
from counterfeiting, track product lifetime, and provide assurance that
the data getting to the Internet is authentic. The MAXREFDES143# reference
design demonstrates an authenticated data chain from a trusted sensor
node to a web server. Additionally, this authenticated data is used to initiate
smart notifications to the user via the web server when it is time to change
the filter (i.e. the protected sensor node) or if an unsafe filter (i.e. counterfeit
sensor node) is installed. The simplicity of this design enables rapid adoption
into any sensor node where system decisions will be made based on the data
gathered from the sensor. The reference design
is supported by mbed libraries and the hardware
is Arduino compatible, making it very easy
to prototype and integrate into new designs.
The DS2465 secure processor included in the
reference design provides heightened security
at low overhead by offloading the SHA-256
cryptographic computations used in the authentication
process.
i.MX 6UltraLite
Low-power,
secure, ARM ®
Cortex ® -A7
applications processor
The i.MX 6UltraLite from NXP is a high performance, ultra-efficient
processor family featuring an advanced implementation
of a single ARM® Cortex®-A7 core, which operates at speeds
up to 696 MHz. The i.MX 6UltraLite applications processor includes
an integrated power management module that reduces
the complexity of external power supply and simplifies power
sequencing. The power management implemented throughout
the IC enables multimedia features and peripherals to
consume minimum power in various low power modes. Each
processor in this family provides various memory interfaces,
including 16-bit LPDDR2, DDR3, DDR3L, raw and managed
NAND flash, NOR flash, eMMC, Quad SPI and a wide range of
other interfaces for connecting peripherals such as WLAN,
Bluetooth, GPS, displays and camera sensors. This efficient,
cost–optimized multi-market applications processor provides
new ways to address performance scalability and low power
for secure smart homes and IoT applications.
Two New IoT/M2Moptimized
Module
Series
EC21 CAT-1 Series – Delivers Power-enhanced
Performance and M2M-optimized Speeds
● Module variants for America, Europe and APAC.
● Max.10Mbps (DL)/Max.5Mbps (UL)
● 32.0 × 29.0 × 2.4mm
● 80-pin LCC + 64-pin LGA
● -40 o C ~ +85 o C
● 4.6g
EC25 CAT-4 Series – High-speed LTE Modules with
2G & 3G Fallback
● Module variants for America, Europe and APAC.
● Max.150Mbps (DL)/Max.50Mbps (UL)
● 32.0 × 29.0 × 2.4mm;
● 80-pin LCC + 64-pin LGA
● -40 o C ~ +85 o C
● 4.6g
Both series are fallback compatible with Quectel UMTS/HSPA+ UC20
module and multi-mode LTE EC20 module in the compact
and unified form factor. For more information, please visit at:
www.quectel.com
90