Spaenaur

L
Multi-Purpose Handles & Cams
Poignées et cames multi-usages
096-264 “T” HANDLE
HOOKED BARS -for Latches
"
For 5/16"
sq. shaft
1-1/8"
STEEL - Yellow Dichromate Finish
Supplied with 5/16" (8 mm) square
hole, double-thickness units, welded
together, with raised centre-boss, which
acts as a useful bush for location on
handle shafts.
Unit Package 10
"
1"
ADJUSTABLE
Double
Zinc
Plated
Priced
Singly
P.C. 099
(With Set Screw)
3-1/2"
Zinc Die Cast - Bright Chrome Plated
Use with any type of lock cam
arrangement. Priced Singly
"
096-333
Priced
Singly
SINGLE
POINT
D-4024 (Mfr. #5559)
3/4"
A
099-181
A=1.2" (30 mm)
099-182
A=1.375" (35 mm)
2-1/4"
2-3/4"
LATCH
INSIDE RELEASE HANDLE
099-713
For handles with shanks 5/16"
(8 mm) square.
Material: Zinc Die-cast
Finish: Kasonized (Grey Enamelled)
Unit Package 10
INSIDE HANDLE
096-266 (With Set Screw)
For 5/16"
sq. shaft
Zinc Die Cast - Chrome Plated
Priced Singly
ADJUSTABLE CAMS
For all handles
with 5/16" Sq. Shank
1"
5/8"
More Cams
on pages
L11 and L14.
1"
Steel, Zinc Plated
Screw
Included
5"
3-7/16"
Screw Included
1-3/16"
Large Cam
A. Length 2.5"
B. Width 1.6"
C. Location 0.45"
D. Boss width 0.75"
E. Boss height 0.625"
F. Cam movement 0.25"
Standard Cam
"
A. Length 1.25"
B. Width 1.6"
C. Location 0.45"
D. Boss width 0.75"
E. Boss height 0.5"
F. Cam movement 0.15"
1-3/8"
INSIDE HANDLE
An excellent general
use item where an
inside handle is
required. Made of
durable malleable iron.
D-4038
(Mfr. #1-5653A)
With Flush Set Screw
LOCKING CAMS (2 Sizes)
These diecast cams take 0.312" (8 mm) shafts and are
secured by a fitted grub-screw. The cam form provides a
simple and fast way of securing cabinet doors against a
gasket.
Priced Singly
110-153
110-152
D-4038H
(Mfr. #3-5653-AU)
Same as D-4038 except with
1/8" hole and Groov-Pin furnished
loose.
Priced Singly
D-4038
Shown
Weight: .25 lbs.
Finish: Plated
C
B
F
E
D
Inch
Pouces
P.C.
099
A
CATALOG 13
L48
16 Mar 04