Spaenaur

Van Door Hardware
Quincaillerie pour les portes de fourgonnette
Enlarged sectional
view showing installation
of cam, cam
bearing and keeper.
CAM TYPE LOCK WITH RECESSED
HANDLE
For Side and Rear Doors
D-3222 (Mfr. #5660)
Fits Right or Left Hand
Designed for thin-door installations, this cam-type
side door lock permits building the vehicle to the
greatest legal width for maximum cargo space.
Handle has thumb-trigger release with holes for
padlock and seal.
2-POINT SLAM LATCHES
D-4047L (Left)
D-4047R (Right)
PLAIN FINISH
Inch
Pouces
Slam-action latch for drop and swing doors.
A slam lock especially designed for use on
doors of utility service trucks,
gasoline trucks, etc.
Pipe not included.
Zinc Plated Finish
Mfr. #5613
Centre Section
(D-3203CL & D-3203CR)
as shown on page L76.
Centre Case
3-3/8" x 2" x 15/32"
Long Rods
1/8" x 1/2" x 26-1/2"
Handle is of Cast Malleable Iron construction.
Bolt Cases
3-3/8" x 2" x 5/8"
L
1-1/2
Enlarged View
of Door Frame
Channel Section
NOTE: This lock cannot be installed in
a door with less than 1-1/2" space
between door channel sides.
Replacement
Groove Pins
239-198.
FEATURES:
• Steel-forged cams.
• Designed for 3/4" standard pipe (1.050" O.D.)
• Cast-malleable handle and thumb release.
• Stainless steel thumb release spring.
• 1/2" dia. seal eye in thumb release.
• Steel-stamped recessed pan.
• 5-1/8" O/A width of recessed pan.
• 18-1/4" O/A length of recessed pan.
• One handle return spring supplied with each kit.
Weight Each
2 lb., 5 oz.
(Right Hand Shown)
RECESSED CAM TYPE SIDE DOOR LOCK can be installed in minimum 1-1/8" door thickness.
Ideal for side door applications where maintaining maximum legal width is required
for vans, trucks and trailers to maximize cargo storage space.
PIN OR WELD
BY CUSTOMER
BOTH ENDS
Fits Right or Left Hand
.840 O.D. (1/2" STD. BLACK PIPE)
PIPE NOT INCLUDED
18-1/4"
13/64" DIA. - 12 MOUNTING HOLES
2 HOLES FOR
D-4027
(Mfr. #5663)
Receptacle & Handle
Carbon Steel
Zinc Plated
5-1/8"
3-1/2"
Features:
• water seal system using o-rings and bushings at the
handle pivot point to prevent water leakage
27X - 255C
GROOV-PINS
PIN OR WELD
BY CUSTOMER
BOTH ENDS
1/2" DIA. PADLOCK EYE
• handle has thumb trigger release with hole for padlock
for additional security options
• forged steel cams and keepers for enhanced strength
• cam action is smooth and positive
CATALOG 13
Weight 6-1/2 lbs.
• furnished with split handle anchoring shafts for ease of
rod installation
1"
1-1/4"
3-1/2"
Available
in Key-locking versions.
• recessed latching system permits building the vehicle to
the greatest allowable legal width for maximum cargo
space.
L78
All items on this page
are Priced Singly.
23 Feb 04