Spaenaur

CATALOG 13
Inch
Pouces
1. Place #2 Phillips screwdriver into recess
of E-Z Ancor.
3. Place fixture in position over installed
E-Z Ancor, and insert screw with #2 Phillips
screwdriver (#8 type A or AB screw
is recommended).
SPAENAUR
No.
102-019
Unit Pkg. Qty. 100
1
;
;
;
;
BEX
E
T O G GL E
Z
2
PLACE FIXTURE
INSERT SCREW!
2. Press into gypsum wallboard while
turning the anchor clockwise until it is
seated flush with the wall.
4. Tighten fixture in place...threads of
screw self-thread securely into the
anchor (a minimum of 1" thread engagement
is recommended). Do not
overtighten.
E-Z TOGGLE
SELF DRILLS!
FAST... no pre-drilling or hole preparation necessary.
Saves time and money.
EASY... self-drills with #2 Phillips hand-driven or cordless
screwdriver... no electric drill or other tools necessary.
SECURE... unique clamping arm replaces both 1/8" and
3/16" winged toggles.
STRONG... deep threads at head seat anchor into 3/8",
1/2" and 5/8" wallboard... patented clamp provides strong
attachment.
SPAENAUR Recommended
No. Fixture Thickness Screw Included
102-004 0" - 1/2" 2-1/8" Phillips Pan Head
102-005 0" - 1/2" 2-1/8" Phillips Washer Head
102-006 1/2" - 1-3/8" 3" Phillips Pan Head
Screw Anchors
Tampons
E-Z-ANCOR ®
®
A Registered Trade Mark of ITW Canada Inc.
SELF-DRILLING DRYWALL ANCHORS
SPAENAUR
No.
102-002
UNIT PACKAGE 100
CORROSION RESISTANT...MADE OF LONG-LASTING ZINC MATERIAL.
FAST... NO PRE-DRILLING OR HOLE PREPARATION. SAVES TIME AND MONEY.
EASY... INSTALLS EASILY WITH #2 PHILLIPS SCREWDRIVER...NO ELECTRIC
DRILL OR OTHER TOOLS NECESSARY.
ATTACH FIXTURE... WITH #8 A OR AB SCREWS.
REMOVABLE... CAN BE EASILY BACKED OUT.
SECURE... DEEP THREADS PROVIDE STRONG ENGAGEMENT IN 3/8", 1/2" AND
5/8" WALLBOARD.
NEAT... UNIQUE TRI-CUT POINT SELF-DRILLS A CLEAN, SMALL HOLE.
BREAKAWAY POINT... POINT CAN BE BROKEN OFF IF CAVITY BEHIND WALL-
BOARD IS TOO SHALLOW.
E-Z ANCOR ® of High Strength Engineered Plastic
(Length 1-3/8" - Shown Actual size)
;
;
;
;
BEX
E
T O G GL E
Z
E-Z-TOGGLE ®
(Screw Included)
3 ;
4
CONTINUE TURNING
SCREW UNTIL TIGHT!
TURN SCREW TO
ENGAGE CLAMP!
(Length 1-11/16" - Shown Actual Size)
• Completely non-conductive.
• Made of Du Pont ZYTEL ® Nylon, one piece.
• Self-drilling, strong engagement in 3/8" to 5/8" wallboard.
• Install #6 A or AB screw with #2 Phillips screwdriver or
cordless screwdriver using a #2 Phillips bit.
;
;
;
All SPAENAUR numbers are suited to 3/8", 1/2" and 5/8" drywall thickness.
BEX
E
T O G GL E
Z
;
;
;
;
BEX
E
T O G GL E
Z
SELF-DRILLING TOGGLE BOLT
FOR HEAVY DUTY ANCHORING
TO DRYWALL
Toggle Material:
ZINC DIE CAST
Unit
Package
Quantity
50
E-Z-TOGGLE ® TEST DATA Screw Size #8-18
Drywall Pullout (lbs.) Shear (lbs.)
Thickness (Toggle from drywall) (Toggle in drywall)
3/8" 67 200
1/2" 84 230
5/8" 148 300
NOTE: The values in the table above are not to be used as design values.
The results above are ultimate average values. In all cases, the drywall
spalled (failed). The values of Pullout and Shear vary with the
inconsistency of the drywall. Drywall will vary in strength due to humidity,
age and other factors. The drywall used in the independent lab was tested
to ASTM Standards.
C
Tel: 1-800-265-8772 Fax: 519-744-0818
C153
10 Mar 04