Spaenaur

Draw Latches
Cliquets d'attelage
Over-centre Draw Latch
with Toggle Action
• Lockable with tumbler type keylock
• Latches/unlatches with over-centre
toggle action
• Finished in black powder coat or bright
polished chrome
• Mounts on outside of door
Material and Finish
LEVER, PAWL, BASE, KEEPER
and LOCK (when used): Diecast
zinc, chrome plated or
black powder coated.
LOCK EXTENSION and LINK:
Die-cast zinc with chemical
protective film.
LOCK SLIDE: Steel, zinc plate
plus bright chromate dip.
Priced Singly
097-049 shown (without lock).
L
Latching
Lower handle. Latching pawl
engages keeper, applies force A.
Resultant force B closes and latches
door with over-centre toggle action,
9.5 (0.38) pull-up distance.
SPAENAUR
No. Mfr. # Style
097-049
Chrome Finish
A7-10-301-30 Standard
097-095
Black Coat Finish
* Locks are keyed alike.
Product Strength Guidelines
Maximum working load: 2200 N (500 lbs.)
Average ultimate load: 3700 N (825 lbs.)
Unlatching
Raise handle; action is
reversed. Force C results in
opposite force D applied
through latch; door is
mechanically pried open a
distance of 7.9 (0.31).
A7-10-302-20
with lock*
millimeter (inch)
Dimensions without
tolerances are for
reference only.
Standard and Key Locking
Assemblies with Finish of Satin
Silver Powder Coat available but
not stocked - delivery 2-3 weeks.
CATALOG 13
L158