TT-3020B Installation Manual - Polaris-as.dk

Table of Contents
1. Introduction 1
2. Equipment installation 2
2.1 Introduction 2
2.1.1 Initial inspection 2
2.1.2 Packing list 3
2.1.3 Storage 4
2.1.4 Repacking for shipment 4
2.2 Technical specifications 5
2.3 Power requirements 7
2.3.1 AC mains operation 7
2.3.1.1 Integrated Capsat System 7
2.3.1.2 Power connector 8
2.3.2 Fuses 9
2.3.3 Grounding 9
Thrane & Thrane
TT-3020B
Capsat Transceiver
Installation Manual
2.4 TT-3001 Antennas 11
2.4.1 Antenna types 11
2.4.1.1 TT-3001B Option 001 Maritime Antenna 11
2.4.2 Mounting bracket 12
2.4.3 Antenna connector 12
2.4.4 Antenna cable 12
2.4.5 Mounting considerations 13
2.4.5.1 TT-3001B-opt. 001 Maritime Antenna 13
2.4.6 Safety Distance for Antenna Units 15
2.5 TT-3020B Capsat Transceiver 16
2.5.1 Mounting bracket 16
2.5.2 Communication port 16
2.5.2.1 Baudrate and protocol settings 16
2.5.2.2 X4 Connector interface 17
2.5.2.3 Interfacing to peripherals 17
2.5.2.3.1 TT-3606A Message Terminal 18
2.5.2.3.2 IBM Compatible PC (Personal Computer) 18
2.5.2.3.3 Computerized equipment 18
2.5.2.3.4 Flow control 19
2.5.3 T-Bus Connector 19
2.5.3.1 Changing port X5 to input NMEA 0183 data 20
2.5.3.2 Changing port X5 to output NMEA 0183 data 20
2.5.3.3 Changing port X5 to T-Bus communication 20
2.5.4 Switch settings 21
2.5.5 Jumper configurations 22
2.5.5.1 Default configuration 22
2.5.6 Clock battery back-up 22
2.5.7 NMEA 0183 Navigational Interface 23
2.5.7.1 NMEA 0183 Reception 23
2.5.7.2 NMEA 0183 Transmission 24
30MAY95 Page i