THE OCULUS-F/64 FRAME GRABBER User's Manual

Recommendations

Info

Page 2-2 The OCULUS-F/64 User's Manual
2.1 INTRODUCTION This manual assumes that you have a basic knowledge of DOS, Windows, and how to install hardware into a PC. The hardware installation consists of a few simple steps as outlined below. • Verify the factory default base address of the Oculus-F/64 for conflict in your computer. If it needs to be changed, please turn to appendix B for information on changing the base address. • Opening your computer and selecting a full-length slot (two slot position for an Oculus-F/64 with a optional camera adapter module). • Inserting the Oculus-F/64 into the PC and securing the bracket. • Connecting the VGA feature cable and the supplied VGA board terminator, if using the single monitor mode. • Connecting the Video Cables. • Installing configuration software (DOS or windows version) and the F/64Pro demonstration application. CAUTION: STATIC DISCHARGE Static electricity can damage the Oculus-F/64 and other components in your computer. Always discharge yourself by touching the metallic case of the computer (with the computer power cord plugged into a grounded outlet), before handling any computer hardware. Keep the Oculus-F/64 in its antistatic bag when it's not installed in a computer. Coreco Inc., Installation and Configuration Page 2-3
Page 1 and 2: THE OCULUS-F/64 FRAME GRABBER User'
Page 3 and 4: Welcome Congratulations on the purc
Page 5 and 6: TABLE OF CONTENTS Welcome..........
Page 7 and 8: • • • • • • • • •
Page 9 and 10: 1.1 INTRODUCTION The Oculus-F/64 is
Page 11 and 12: 1.8 MEMORY The Oculus-F/64 incorpor
Page 13 and 14: The Oculus library of C-callable fu
Page 15 and 16: Part No. DESCRIPTION DRAM expansion
Page 17: • • • • • • • • •
Page 21 and 22: CONNECTING THE VGA FEATURE CABLE FO
Page 23 and 24: For simplicity, the following infor
Page 25 and 26: ITEM [ 1 ] CURRENT DEVICE The Curre
Page 27 and 28: Acquistion Sync Source [ 1 ] Camera
Page 29 and 30: SELECTION [ 5 ] DISPLAY VIDEO FORMA
Page 31 and 32: The Memory Format should equal or e
Page 33 and 34: I/O addressed communication is the
Page 35 and 36: • Configure your memory manager t
Page 37 and 38: VGA PassThrough Setup [ 1 ] VGA Mod
Page 39: 2.4 OCULUS INTELLIGENT CONFIGURATIO
Page 42 and 43: Page 3-2 The OCULUS-F/64 User's Man
Page 44 and 45: 3.2 INPUT DB9 1 2 3 4 (Diff) CS VS
Page 46 and 47: 3.2.4 OPTIONAL DIGITAL INPUT ADAPTE
Page 48 and 49: On Oculus-F/64 boards without the o
Page 50 and 51: The VGA Keyer manages the keying of
Page 58 and 59: A.4 CAMERA INPUTS A.5 PROCESSING Fo
Page 60 and 61: A.8 ENVIRONMENTAL CONDITIONS Temper
Page 64 and 65: 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2
Page 66 and 67: J10 - LATTICE FPGA DECODE PROGRAMMI
Page 68 and 69:
Coreco Inc., OCULUS-F/64 Index Page
Page 70 and 71:
C.2 Analog Video Output Connector P
Page 72 and 73:
C.4 VGA Pass-Through Connector Pin
Page 74 and 75:
Coreco Inc., OCULUS-F/64 Index Page
Page 76 and 77:
Page 8-2 The OCULUS-F/64 User's Man
Page 78 and 79:
E EIA-422 interface, 3-6 F F/64Pro,
show all

THE OCULUS-F/64 FRAME GRABBER User's Manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?