THE OCULUS-F/64 FRAME GRABBER User's Manual
THE OCULUS-F/64 FRAME GRABBER User's Manual
THE OCULUS-F/64 FRAME GRABBER User's Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ON<br />
1 2 3 4 5 6 7 8<br />
ON ON<br />
Interrupt Channel<br />
NOT Selected<br />
B.3 CONFIGURATION JUMPERS<br />
GSP PROGRAM MEMORY SIZE SELECTION<br />
B3<br />
B3<br />
Interrupt Channel 15 Select<br />
Interrupt Channel 14 Select<br />
Interrupt Channel 12 Select<br />
Interrupt Channel 11 Select<br />
Interrupt Channel 10 Select<br />
Interrupt Channel<br />
Selected<br />
GSP Program memory size: 1Mb (256k x 32)<br />
GSP Program memory size: 4Mb, 16Mb, or 32Mb<br />
1 Mbyte is the factory default GSP DRAM memory that is installed. If<br />
additional DRAM modules are required, then jumper B3 must be moved as<br />
shown above. Refer to the last page of this appendix for the physical location<br />
of B3.<br />
Coreco Inc., Appendix B <strong>OCULUS</strong>-F/<strong>64</strong> Configuration Switches Page 6-5