THE OCULUS-F/64 FRAME GRABBER User's Manual
THE OCULUS-F/64 FRAME GRABBER User's Manual
THE OCULUS-F/64 FRAME GRABBER User's Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2.1 INTRODUCTION<br />
This manual assumes that you have a basic knowledge of DOS, Windows, and<br />
how to install hardware into a PC. The hardware installation consists of a few<br />
simple steps as outlined below.<br />
• Verify the factory default base address of the Oculus-F/<strong>64</strong> for conflict in<br />
your computer. If it needs to be changed, please turn to appendix B for<br />
information on changing the base address.<br />
• Opening your computer and selecting a full-length slot (two slot position<br />
for an Oculus-F/<strong>64</strong> with a optional camera adapter module).<br />
• Inserting the Oculus-F/<strong>64</strong> into the PC and securing the bracket.<br />
• Connecting the VGA feature cable and the supplied VGA board<br />
terminator, if using the single monitor mode.<br />
• Connecting the Video Cables.<br />
• Installing configuration software (DOS or windows version) and the<br />
F/<strong>64</strong>Pro demonstration application.<br />
CAUTION: STATIC DISCHARGE<br />
Static electricity can damage the Oculus-F/<strong>64</strong> and other components in your<br />
computer. Always discharge yourself by touching the metallic case of the<br />
computer (with the computer power cord plugged into a grounded outlet),<br />
before handling any computer hardware. Keep the Oculus-F/<strong>64</strong> in its antistatic<br />
bag when it's not installed in a computer.<br />
Coreco Inc., Installation and Configuration Page 2-3