SSL Mixer Manual - Absolute Professional Audio

Preferences
This entry is divided into two sub menus,
General and Mixer.
Most entries inside the Preferences Menu
are options, that can be activated (ticked)
or deactivated. Only a few items (arrow or
dot to the right) open further submenus or
dialogue boxes.
General sub menu
Connect to Console Manager
Please check the Console Manager Installation in Chapter 5.
Activating this entry connects the SSL Mixer V6 to the optional Console
Manager application, which can be used connect the SSL Mixer
Software with a huge variety of hardware control surface.
If the Console Manager Module is not already active it will be launched automatically.
Please read the Section Controlling the Mixer with a Hardware Control Surface for further details on how to set up and use the
Console Manager Module.
Ignore Incoming Sample Rate Indication
When this option is selected, the incoming Sample Rate indication is
ignored, and the currently selected Sample Rate is maintained .
This is useful if the Master Clock source is transmitting an incorrect
Sample Rate indication.
AES/EBU (S/PDIF) Xmt Channel Status
You can set AES/EBU or S/PDIF to communicate in a "Consumer" or
"Professional" format for the digital audio data transmitted from a
Soundscape 32’s AES/EBU (S/PDIF) outputs.
For example, some professional DAT recorders will not record from their digital inputs if they receive data in the "Consumer"
format.
Soundscape 32 adjusts to either format automatically, therefore there is no equivalent setting for the AES/EBU (S/PDIF) digital
input.
Page 103