Manual MR3140-M - DResearch
Manual MR3140-M - DResearch
Manual MR3140-M - DResearch
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>DResearch</strong> – User <strong>Manual</strong> TeleObserver <strong>MR3140</strong>-M 2011-02-03<br />
3.1.1.1 System :: Basic settings<br />
Once a hard disk is put in a different <strong>MR3140</strong>-M unit all the data on the hard disk will be<br />
automatically deleted after 30 seconds, if this is set up in the device configuration. (It is the<br />
standard setting under Archive settings ���� action when exchanging hard disks). This is a<br />
security mechanism!<br />
For these 30 seconds the HD LED on the front of the device flashes yellow. During this time<br />
you can switch the machine off if the data are not to be deleted.<br />
After 30 seconds the data are irretrievably deleted and are no longer recoverable! The hard disk is<br />
automatically adopted by the recorder and prepared for recording. (Exception: the HD is<br />
password-protected and this is not stored in the device configuration. In this case the disk will be<br />
declined and the HD LED on the device lights red.)<br />
We recommend that all hard disks which are to be swapped from one device into another should<br />
be routinely formatted in the TTU. In this process the password for the storage device is replaced<br />
and any problems with disk adoption in the other unit are avoided.<br />
31