PE22 / ELC - eta plus electronic GmbH
PE22 / ELC - eta plus electronic GmbH
PE22 / ELC - eta plus electronic GmbH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3 Installation page 9<br />
<strong>ELC</strong> <strong>PE22</strong>_PE32-V2.2-09.11-GB Subject to technical alterations<br />
Top: Correct crimp connection<br />
Middle: Stripped part of the wire too long,<br />
gap between insulation and crimp barrel too<br />
large<br />
Bottom: Stripped part of the wire too short<br />
because conductor is not visible through<br />
inspection hole.<br />
• Insert cable into the cable gland and<br />
bush casing<br />
• Insert crimp contacts into the connector<br />
module until they lock into place<br />
• Ensure that the shield evenly covers the<br />
plastic inset of the cable gland (360°<br />
contact)<br />
• Tighten EMC cable gland