TotalView Users Guide - CI Wiki

Figure 61: Root Window
Showing Process and
Thread Status
Figure 62: Process and Thread
Labels in the Process
Window
Viewing Process and Thread States
The following figure on the next page shows TotalView displaying process
state information in the Attach to process page. (See Figure 61.)
CLI: dstatus and dptsets
When you use either of these commands, TotalView also displays
state information.
The Status of a process includes the process location, the process ID, and
the state of the process. (These characters are explained in “Seeing Attached
Process States” on page 68.)
If you need to attach to a process that is not yet being debugged, open the
File > New Program dialog box and select Attach to an existing process
from the left pulldown list. TotalView will then show all processes associated
with your username. Notice that some of the processes will be dim
(drawn in a lighter font). This indicates either you cannot attach to the process
or you’re already attached to it.
Notice that the status bars in the Process Window also display status information.
(See Figure 62.)
TotalView Users Guide: version 8.7 67