Multicam 9.00 User manual - EVS
Multicam 9.00 User manual - EVS
Multicam 9.00 User manual - EVS
- TAGS
- multicam
- manual
- www.evs.tv
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>EVS</strong> <strong>Multicam</strong> - <strong>User</strong> Manual<br />
<strong>EVS</strong> Broadcast Equipment SA – March 2008<br />
4.5 OSD SETTINGS<br />
OSD Settings p.1.1<br />
[F1]Genlock Error Msg: Yes<br />
[F2]Disk Error Msg : Yes<br />
[F3]Network Error Msg: Yes<br />
[F4]Cue number on OSD: Yes<br />
[F5]Keyword info : No<br />
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn<br />
4.5.1 GENLOCK ERROR MSG<br />
Possible values: Yes (default) / No<br />
Version <strong>9.00</strong><br />
This function enables or disables the Genlock information on the output<br />
monitor. If Genlock reference is not correct, the !GkV message appears on<br />
the output monitor.<br />
4.5.2 DISK ERROR MSG<br />
Possible values: Yes (default) / No<br />
This function displays an error message (!Dsk) on the output monitor when<br />
a disk is faulty.<br />
4.5.3 NETWORK ERROR MSG<br />
Note<br />
The XT[2] is equipped with a RAID disk array. This means that the<br />
operation can continue seamlessly even with 1 faulty disk. If 1 disk<br />
is disconnected during operation, the “!Dsk” message appears on<br />
all output monitors, and another message appears when the<br />
operator shuts down the application, to invite him to replace the<br />
disk and rebuild the RAID array.<br />
Refer to the Technical Reference <strong>manual</strong> for details on the RAID<br />
system and its maintenance.<br />
Possible values: Yes (default) / No<br />
This function displays an error message (!Net) on the output monitor when<br />
the network connection is faulty and another message (� Net) when the<br />
network becomes available again and the system is trying to re-connect.<br />
13
Change language