Multicam 9.00 User manual - EVS
Multicam 9.00 User manual - EVS
Multicam 9.00 User manual - EVS
- TAGS
- multicam
- manual
- www.evs.tv
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>EVS</strong> <strong>Multicam</strong> - <strong>User</strong> Manual<br />
<strong>EVS</strong> Broadcast Equipment SA – March 2008<br />
4.11 <strong>EVS</strong> CONTROLLER SETTINGS<br />
<strong>EVS</strong> Controller p.6.1<br />
[F1]Effect duration for Take: 00s05fr<br />
[F2]Fast jog : 20x<br />
[F3]PGM Speed/Var Max : 50%<br />
[F4]Lever engage mode : Direct<br />
[F5]Second lever range : -100% +100%<br />
[F6]Recall clip Toggle : Enable<br />
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn<br />
4.11.1 EFFECT DURATION FOR TAKE<br />
4.11.2 FAST JOG<br />
Possible range: 00s00fr to 20s00fr. Default: 00s05fr<br />
Version <strong>9.00</strong><br />
This parameter defines the duration of the transition when using the TAKE<br />
key to chain 2 sequences in PGM+PRV mode.<br />
Possible values: 01 to 20 times. Default: 20x<br />
This parameter sets the increment of the jump when in Fast Jog mode.<br />
4.11.3 PGM SPEED/VAR MAX<br />
Possible values: 1 – 400%. Default: 50%<br />
During playback, if PGM Spd or VarMax has been enabled in the secondary<br />
menu of the Remote panel, the lever range will be adapted so that:<br />
• the only playback value for any position of the lever other than 0, is the<br />
one specified by this parameter in the setup (PGM Spd mode ON)<br />
OR<br />
• the speed range defined by the lever is limited to the value specified by<br />
this parameter (VarMax mode ON).<br />
31
Change language