Multicam 9.00 User manual - EVS
Multicam 9.00 User manual - EVS
Multicam 9.00 User manual - EVS
- TAGS
- multicam
- manual
- www.evs.tv
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>EVS</strong> <strong>Multicam</strong> - <strong>User</strong> Manual<br />
<strong>EVS</strong> Broadcast Equipment SA – March 2008<br />
Special Control Settings p.7.5<br />
Control type OSD Display<br />
PGM5:[F1]Exclusive [F5] Main<br />
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn<br />
This page is the same as Page 7.4, but assigns PGM5<br />
4.14 GPI IN SETTINGS<br />
GPI In Settings p.8.1<br />
GPI# Channel/Device Port Function<br />
1 [F1]PGM1 -- [F5]Play<br />
2 [F2]PGM2 -- [F6]Play<br />
3 [F3]PGM3 -- [F7]Play<br />
4 [F4]PGM4 -- [F8]Play<br />
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn<br />
GPI In Settings p.8.2<br />
GPI# Channel/Device Port Function<br />
5 [F1]RMT1 -- [F5]Play<br />
6 [F2]RMT1 -- [F6]Next<br />
7 [F3]RMT1 -- [F7]Skip<br />
8 [F4]RMT1 -- [F8]Pause<br />
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn<br />
Version <strong>9.00</strong><br />
These 2 pages define the settings for the GPI inputs of the XT[2] server.<br />
For each GPI input, the operator has the possibility to define the following<br />
parameters:<br />
• Channel that the GPI will affect or the device that the GPI is assigned<br />
to.<br />
A device can be an <strong>EVS</strong> Remote #1 or one of the protocols defined in<br />
page 7.1 (if some GPI must be used by the AirBox in a mixed<br />
configuration LSM+AirBox, or if a GPIs must trigger some actions on a<br />
channel controlled by a Sony protocol, etc.). If the operator selects <strong>EVS</strong><br />
Remote #1, the GPI will trigger the selected action on all channels<br />
controlled by that remote.<br />
39
Change language