Multicam 9.00 User manual - EVS

EVS Multicam - User Manual
EVS Broadcast Equipment SA – March 2008
3. Press ENTER to validate your selection.
Clips p.3.3
[F1]PLST Receive Pg : 1 2 3 4 5 6 7 8 9 0
[F2]Protocol receive Page : 06
[F3]Default XFile : XFile #31
[F4]Grab image : Disable
[F5]Browse button : Browse
[F6]Reset Archive Status
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
4.7.11 PLST RECEIVE PAGE
Version 9.00
Possible values: Select one or more clip pages from 1 to 10. Default: Page
10
This function allows the operator to automatically create a local copy of all
network clips when copying a local or network playlist. In this setting, you
need to select the page(s) of your machine where clips received when using
the PLST+CLIPS copy function must be stored. Refer to the description of
the Playlist copy function for details. Clip pages can be assigned
simultaneously as PUSH and PLST Receive Pages.
4.7.12 PROTOCOL RECEIVE PAGE
Default: Protocol Receive page 6
This setting defines in which page the clips created by protocol are stored.
When a page is full, clips are stored on the next page.
Only clips created on this page (and the other protocol pages if the first
page is full) are visible for protocols.
4.7.13 DEFAULT XFILE
Value: XFile name and network number. Default: -------- #--
This setting defines the XFile where clips must be sent to when using the
ARCHIVE function from the EVS Remote panel or VGA screens.
4.7.14 GRAB IMAGE
Possible values: Disable (default) / Enable
23