Multicam 9.00 User manual - EVS

EVS Multicam - User Manual
EVS Broadcast Equipment SA – March 2008
4.9.7 SPLIT AUDIO
Playlist p.4.2
[F1]Split audio editing : Disable
[F2]Extend split transition : End Cut
[F3]Swap audio tracks : Auto
[F4]Playlist loop : No
[F5]Load playlist : Always
[F6]Playlist auto fill : All Cam
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
Possible values: Disable (default) / Enable
Version 9.00
This parameter enables or disables the Split Audio Editing option in Play-
List mode. Changing this parameter modifies the display on the output
monitors and adds special function keys on the LCD screen to define
different transition points and durations on the video and audio tracks.
Note
A specific license code (option 112: Playlist Mgmt Advanced) is
required to enable split audio editing.
4.9.8 EXTEND SPLIT TRANSITION
Possible values: Center (on) Cut / End (on) Cut / Start (on) Cut / Ask
This parameter determines how the transition should be extended when the
transition duration on the audio or video track only is modified. This
parameter is only useful when performing split audio editing. The following
values can be defined:
Value Meaning
Center Cut
(default)
Extend equally on both sides of the transition
End Cut Extend the beginning of the transition to the left so
that the end of the transition is unchanged
Start Cut Extend the end of the transition to the right so that
the beginning of the transition is unchanged
Ask Allows the operator to select any of the above
options when editing the duration of the transition
27