Multicam 9.00 User manual - EVS

EVS Multicam - User Manual
EVS Broadcast Equipment SA – March 2008
4.11.6 RECALL CLIP TOGGLE
Possible values: Enable (default) / Disable
Version 9.00
This option allows the operator to select the camera of a clip through the
Function keys. Pressing several times the F_ key browses to CAM A, CAM
B, CAM C, CAM D, CAM E and CAM F.
EVS Controller p.6.2
[F1]Record key : Start REC + Live
[F2]Pointing device : Tablet
[F3]VGA & RMT Sync : No
[F4]PGM/PRV Mode : Enable
4.11.7 RECORD KEY
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
Possible values: Start REC+Live (default) / Live
This parameter changes the function of the RECORD key on the remote:
• Start REC+Live: Pressing the RECORD key starts the record process
and switches to LIVE mode.
• Live: Pressing the RECORD key only switches to last recorded picture,
but the record is not restarted if it has been previously stopped by the
operator.
4.11.8 POINTING DEVICE
Possible values: Tablet (default) / Touch Screen
This setting initializes the Tablet or the Touch Screen. If the tablet is not
properly calibrated, use this function to re-initialize it. If using the Touch
Screen, this one must always be connected to RS422 port #6 of the XT[2],
and defined as such at page 7.1 of the setup.
4.11.9 VGA & RMT SYNC
Possible values: No, Yes, Server Nbr
This parameter selects whether and how the current clips machine, page
and bank of VGA screens and EVS Remote panel must be synchronized.
33